土塑性力学读书报告..docVIP

土塑性力学读书报告  基于分叉理论的岩体局部化现象研究 要：为了研究岩体局部化现象，基于轴向压杆稳定实例，运用数理和力学知识，根据 Drucker-Prager（简称 D-P）准则， 推导了基于分叉理论的通用表达式。在此基础上，结合有限差分理论得出FLAC3D计算中岩体内发生分叉的判定条件，之后在自带的FISH编译语言的辅助下，在FLAC3D中建立数值分析模型，采用D-P本构关系，研究了岩体局部化现象及其发展过程。研究结果表明：在FLAC3D中以 20000步为间隔所得的不平衡力比率模型系统逐渐趋于稳定，不平衡力比率逐渐降低，局部分叉判定条件和数值验证，较为科学合理地阐述了常用分叉判定条件的由来，为解释岩体局部化现象的机制和过程提供了理论支撑，从而对岩体局部化现象研究起到了一定的推进作用。 键词：分叉理论；岩体局部化现象；FISH3D语言 Abstract: In order to study the rock localization phenomenon, based on the examples of the stability of axial pressure bar, applied the mathematical and mechanical knowledge, according to Drucker-Prager criterion, a universal formula can be derived based on the bifurcation theory. On this basis, combined with the finite difference theory, the judging criterion of bifurcation in rock mass in FLAC3D calculation can be worked out. Then under the assistant of own FISH compile language, using the Drucker-Prager criterion, a numerical analysis model is established in FLAC3D to study the rock localization phenomenon and its development process. The results show that in FLAC3D the imbalance force ratio model system came from the 20 000 steps interval gradually tends to be stable, the unbalanced force ratio gradually reduces; the localization phenomenon gradually expands the scale to its stability; and the clarity increases gradually, which confirms that the bifurcation theory can effectively analyze the rock localization phenomenon. The rock bifurcation criteria of rock localization phenomenon and numerical verification given by this paper more scientifically and reasonably expound the origin of the universal bifurcation condition, so as to provide the theoretical support for the explanation of the mechanism and process of the rock localization phenomenon to play a promoting role. Key words: bifurcation theory; localization phenomena; FISH language 目录 摘 要 i Abstract ii 目录 iii 1 引 言 1 2分叉理论 2 3数值原理及流程 5 4数值分析 7 5结论 9 参 考 文 献 10 1 引