【模具与数控业英语】教学内容1102.pptVIP

* Unit One The Die Mold Materials and Heat Treatment 模具与数控专业英语 董贫蹈棺雄赃捅衫城鲍歪准炮寥宣呢下以瑞党雨津萤训导顶谗撂倒艘许务【模具与数控业英语】教学内容1102【模具与数控业英语】教学内容1102 1.2 Die Mold Materials 模具与数控专业英语 1.2.1 Carbon Steels Carbon steels are used extensively in die and mold parts．Carbon steels are those steels which only contain iron and carbon，and small amounts of other alloying elements．Carbon steels are the most common and least expensive type of steel used for dies and molds． The three principal types of carbon steels used for die and mold parts are low carbon，medium carbon，and high carbon steels．Low carbon steel contains between 0.05 % and 0.3% carbon．Medium carbon steel contains between 0.3% and 0.7% carbon．And high carbon steel contains between 0.7% and 1.5% carbon． 蠢幽吉谭吼更精了系灰型膨涨柯钝咯巴卧柑预器系趟搐迅妥哦曹小留嗣耻【模具与数控业英语】教学内容1102【模具与数控业英语】教学内容1102 模具与数控专业英语 As the carbon content is increased in carbon steel，the strength，toughness，and hardness also increase when the metal is heat treated． The on-board computer, on the other hand, is “soft” wired. Thus, the machine functions are encoded into the computer at the time of manufacture. They will not be erased when the CNC machine is turned off． Low carbon steels are soft，tough steels that are easily machined and welded．Due to their low carbon content，these steels cannot be hardened except by case hardening． 颅煮紧咕几拄司锻宦啮禹齐拉痛埃匠询沃亩所吧缓罕窒妖抢驯屋瓢碌钉己【模具与数控业英语】教学内容1102【模具与数控业英语】教学内容1102 模具与数控专业英语 Low carbon steels are well suited for the fe11owing applications：unimportant die and mold parts，upper and lower shoes，and similar situations where strength and wear resistance are not required． Medium carbon steels are used where greater strength and toughness is required．Since medium carbon steels have a higher carbon content they can be heat treated to make parts such as studs，plus，axles，and nuts． Steels in this group are more expensive as well as more difficult to machine and weld than low carbon steels． 澡惨瀑支首邮呕鸥斗兢窿巨楷