钢管壁厚示方法.docVIP

钢管壁厚表示方法 钢管壁厚表示方法有管子表号、钢管壁厚尺寸和管子重量三种方法 1）是以管子表号Sch表示壁厚。 管子表号是管子设计压力与设计温度下材料许用应力的比值乘以1000,并经圆整后的数值。 即: Sch＝P/[σ]t×1000 ANSI B36.10壁厚等级：Sch10、Sch20、Sch30、Sch40、Sch60、Sch80、Sch100、Sch120、Sch140、Sch160十个等级; ANSI B36.19壁厚等级：Sch5s、Sch10s、Sch40s、Sch80s四个等级; 2）以钢管壁厚尺寸表示 中国、ISO、日本部分钢管标准采用 3）是以管子重量表示管壁厚度,它将管子壁厚分为三种： a.标准重量管,以STD表示 b.加厚管， 以XS 表示 c.特厚管， 以XXS表示。 对于DN≤250mn的管子，Sch40相当于STD，DN200mm的管子,Sch80相当于XS。 8SCH40:是DN200,外径为8.625in=219 mm 壁厚为0.322in=8.1788mm 没有8“SCH40 12” 8SCH40 14的规格! Nominal Pipe Size From Wikipedia, the free encyclopedia Nominal Pipe Size (NPS) is a North American set of standard sizes for pipes used for high or low pressures and temperatures.HYPERLINK \l cite_note-B36.10M-p-1-0[1] Pipe size is specified with two non-dimensional numbers: a nominal pipe size (NPS) for diameter based on inches, and a schedule (Sched. or Sch.) for wall thickness. NPS is often incorrectly called National Pipe Size, due to confusion with HYPERLINK /wiki/National_pipe_threadnational pipe thread (NPT). The European designation equivalent to NPS is DN (diamètre nominal/nominal diameter), in which sizes are measured in millimetres.HYPERLINK \l cite_note-DN-1[2] The term NB (nominal bore) is also frequently used interchangeably with NPS. Contents HYPERLINK \l History1 History HYPERLINK \l Application2 Application HYPERLINK \l NPS_tables_for_selected_sizes3 NPS tables for selected sizes HYPERLINK \l NPS_.E2.85.9B_to_NPS_3.C2.BD3.1 NPS ? to NPS 3? HYPERLINK \l NPS_4_to_NPS_93.2 NPS 4 to NPS 9 HYPERLINK \l NPS_10_to_NPS_243.3 NPS 10 to NPS 24 HYPERLINK \l NPS_26_to_NPS_363.4 NPS 26 to NPS 36 HYPERLINK \l Additional_sizes_.28NPS.293.5 Additional sizes (NPS) HYPERLINK \l See_also4 See also HYPERLINK \l Notes5 Notes HYPERLINK \l References6 References HYPERLINK \l Bibliography6.1 Bibliography HYPERLINK \l External_links7 External links HYPERLINK /w/index.php?title=Nominal_Pipe_Sizeaction=editsection=1edit History In March 1927, the HYPERLINK /wiki/American_National_Standards_Instit