装配实习报告2讲解.docVIP

来电显示电话机和对讲机的装配调试 （陕西理工学院物理与电信工程学院通信1103班，陕西 汉中 723001） 指导教师：薛转花  Assembly and commissioning of telephone caller ID and walkie talkie Zhang ZhiRong (Grade11,Class3，Major of Communication Engineering，School of Physics and telecommunication Engineering of Shaanxi University of Technology, Hanzhong 723001,China) Tutor:Xue ZhuanHua [Abstract]This course is designed by the single - and single - assembly, with a radio and caller ID function of the telephone, welding debugging, and to rule out the failure encountered. Preliminary study of the working principle of the radio and caller ID, to understand the general steps of the whole machine installation, and to master the operation method of welding components. Is the high frequency signal from the radio. The antenna received by the detector is reduced to audio signal to the headset into sonic. Caller ID telephone communication is user equipment to realize the acoustic energy and electric energy conversion, consisting of transmitter, receiver and transmitting and receiving signal components. The speaker, the transmitter converts voice into electrical signals sent to the other side, along the line; by then, the electrical signal received by the receiver is reduced to voice. The practice completed the radio and caller ID function of the telephone set, and can work. [Keyword]telephone caller ID;walkie talkie;assembly and commissioning 目录 1.绪论 1 1.1课题背景 1 1.2 研究内容 1 1.2.1 来电显示电话机 1 1.2.2对讲机 1 1.3装配实习目的 2 2.来电显示电话 2 2.1 电话机设计内容 2 2.2 电话机设计原理 2 2.3 焊接和调试过程 4 2.3.1 焊接点的基本要求 4 2.3.2 手工焊接的基本操作方法 4 3.调频收音机、对讲机的系统设计 5 3.1调频收音机、对讲机的工作说明 5 3.2 调频收音机、对讲机原理及其框图 5 3.3 调频收音机、对讲机的技术参数 6 3.4 调频收音机、对讲机主要芯片简介及电路设计 7 3.4.1 D1800芯片 7 3.4.2 D2822芯片 7 3.4.3调频收音机、对讲机整体电路设计 8 3.5 调频收音机、对讲机的安装与调试 9 3.5.1 调频收音机、对讲机的焊接与安装 9 3.5.2调频收音机、对讲机的调试 9 4.总结 11 致谢 12 参考文献 13 附录 14 1.1课题背景 通信工程专业装配实习是一个十分重要的综合性实践教学环节，是学生综合运用所学知识技能，为将来走上社会工作岗位奠定基础的一个重要 实践环节。学生通过装配实习，不仅可以强化训练动手能力，而且可以检 验所学基本知识和基本技能，进一步加强理论联系实际，丰富实践