基于plc的水厂滤池自动控制系统设计毕业设计.doc

安徽工程大学本科 毕业设计（论文） 专 业： 自动化 题 目： 基于PLC的水厂滤池 自动控制系统设计 作 者 姓 名： 导师及职称： 导师所在单位： 电气工程学院 2012 年 6 月 13日基于PLC水厂滤池自动控制系统设计 The Design of Filter Pool Automatic Control System in Waterworks based on PLC Abstract Water plant water supply is essential for people. As the modern urban society and economic development, urban water consumption continued to increase water supply insufficient has become the bottleneck of the urban development, the use of groundwater resources is nearly saturated, increasing the supply of surface water is the only feasible way to solve the problem of inadequate water supply. Water supply not only to meet the needs of the pipe network, to ensure adequate water supply, but also significantly improve the water quality. Therefore, the critical process of the water plant upgrade to improve its water treatment capacity, increasing the amount of water is an effective way to meet the needs of urban development. The filter is the last of the waterworks net structure of the conventional treatment process, the filter is running a direct impact on water quality of the water treatment plant. The goal of this thesis is a systematic approach to solving water supply automatic control filter backwash process, the continued use of artificial means, labor-intensive, low efficiency, security is difficult to protect, and this must be the transformation of the filter automation systems. In this paper, the following work: A detailed analysis and synthesis of the history of the development, the type of automation system and water supply enterprise automation of water supply enterprise automation application status. A brief introduction on the water plant filters process. Filter the liquid level control, and backwash control and control strategies are analyzed.PLC hardware connections as well as procedures for the preparation and simulation configuration. Keywords: PLC; the water plant