广州TUV测试计划.docVIP

Laboratory Measurements GF3.1 Engineer Richard Zhu Client Dee Van Lab Engineer Appliance Battery Charger Requested Date Oct. 08, 2007 Model No. DSA-5J-12 Fa 120050 Re-test Sample No. 5 Full-test Standard EN60335-2-29: 2004 Modification Report No.001 Construction check SAP No. + Item 173033020 + 100 Add Test after review Expected Date: Lab Measurements return to Engineer directly Lab Use Only Lab Start Date 16/ 10 /2007 Lab Finish Date 16/ 10 / 2007 Remarks: This lab measurement report is for humidifier. Testing for electronic system is covered. Unless otherwise specified, all values mentioned in this lab report are in r.m.s. value. 请提供测试所使用的仪器清单，谢谢！ Rating of the battery charger: input: 100-240V, 50/60Hz, 0.2A Output: DC 12V, 0.5A 9.6V and 18V will be tested. The test schedule may be changed according to the real condition of the product. * Clause(s) Test(s) Result 7.14 Rubbing Test for Rating Label P / F 8 Protection Against Accessibility to Live Parts P / F 10.1 Power Input and Current Test P / F 10.101 No-load DC output voltage measurement P / F 10.102 DC output current measurement P / F 11 Heating P / F 13 Leakage Current and Electric Strength Test P / F 15.3 Humidity Test P / F 16 Leakage Current and Electric Strength Test (after clause 15) P / F 17 Overload Protection of Transformers and Associated Circuits P / F 19.11.1 Low-Power-Point Measurement - 19.11.2 Abnormal: Component Faults P / F 19.101 Short-Circuit Control in cl.11 P / F 19.102 Reverse Battery P / F 20 Stability Test P / F 21 Mechanical Strength Tests P / F 21.101 Dropping Test P / F 23.5 Electric Strength Test for Internal Wiring P / F 25.15 Cord Pull Test P / F 28 Screw Test P / F 30 Glow-Wire, Ball Pressure Test P / F Select the test(s) to be done. Attachments: Date Signature Date Signature Date Signature Test Engineer Che