充电器外壳注射模具设计本科毕业论文.docVIP

编号： 毕业设计说明书 题 目： 充电器外壳注射模具 设计 学 院： 国防生学院 专 业：机械设计制造及其自动化 学生姓名： 郑波 学 号： 1000110532 指导教师： 郭中玲 职 称： 高级工程师 题目类型：(理论研究 (实验研究 ( 工程设计 (工程技术研究 (软件开发 2014年 5 月 4 日 摘 要 Abstract Injection molding is an important molding plastics. Through the design of the injection mould for the charger shell, can basically, a comprehensive understanding of the basic principles, methods of injection mold design. In the mold structural design process, I attempt to put forward a variety of different forming schemes, and the schemes are compared with the teacher discussion. In the comparison process, found a lot of problems, but also understand the mold design requirements and basic principles, finally finish without a data selection in access to a large number of books to help. In the analysis of the design process characteristics of common commodity charger, and introduces the technology characteristics, forming ABS material molding process, mold and molding process. At the same time, analyzed the mold structure and calculation, master the design of a complete mold to produce structure. Through this design, can be more skilled use of Auto-CAD, Pro-E and other software mold aided design, improve the ability of computer drawing their own. This graduation design is fully engaged in mold design industry for the future lay a solid foundation. The main design is the design of injection mold for the shell of charger, focuses on the analysis of plastic molding principle, material selection and injection technology. The teacher assigned task, I would first of task were analyzed to understand, and access to a large number of books, manuals and documentation, to mold a certain understanding and clear the task completed their. In the ABS charger understanding, to meet the product mass production, high precision, complex sh