北电OME6500光网络产品概述.ppt

* 10 Port Muxponder (Supermux) 10G DWDM port 10 Faceplate client ports Hardware 10 SFP based client ports with DWDM Tunable line (G.709 wrapped) Software Features Each client port is line rate/protocol selectable FC-100, FC-200 GE OC-n/STM-n (up to 2.5G) 1+1 APS protection, non-revertive 10G DWDM line ports SONET/SDH client ports UPSR/SNCP on 10G DWDM line port GFP-T encapsulation of GigE and FC STS-3c/VC-4 VCAT only for GE/FC Full rate only Max 9 GE, 10 FC100, 5 FC200 Up to 10 ports OC3, OC12 and up to 4 ports OC48 Uni-directional traffic (GE DC) ADM capability (1 or 2 cards) GE, OCn Access Panel Fiber Routing SP + COMMs SuperMux SP + COMMs SuperMux SuperMux SuperMux SuperMux SuperMux SuperMux SuperMux MIC SuperMux PWR SuperMux PWR 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 SuperMux SuperMux SuperMux SuperMux 3 4 5 6 * Supermux Configurations Two Card ADM Line to Client Traffic Unprotected Line 1+1 Protected Line Unprotected Client 1+1 SONET/SDH Protected Client Client to Client Traffic Unprotected Clients 1+1 SONET/SDH Protected Clients UPSR/SNCP Path protection from 10G Line path to GigE client (Uni-directional, 1WAYPR and Bi-directional, 2WAYPR) UPSR/SNCP Path protection from 10G Line path to OCn/STMn client (Bi-directional, 2WAYPR) [Protected] Client to [Protected] Client [Protected] Line to Client [Protected] Line to [protected] Client Single Card ADM Line to Client Traffic Unprotected Line Unprotected Client Client to Client Traffic Unprotected Clients Uni-directional client to line traffic for GigE clients Traffic protection will generally need to be done via one of two methods, outside of the OME External UPSR/SNCP path closure SONET/SDH TOH is terminated within SuperMux circuit packs Higher layer protection for data services Client to Client Line to Client * 2x10G OTR card 4 XFP ports Support for following XFPs: 10G DWDM (~110 Km) Client support as per current XFPs on BB cards Each pair of XFP ports can operate independently In OTR mode OR in REGEN mode