FloatingRoofTanks德和盛油气站防雷讲座培训讲义.ppt

air termination rods to protect electric equipment 避雷针保护电子设备 Tank,cathodic protected 油罐, 阴极保护 down conductor 引下线 To: electric equipment 至:电力设备 Rustrol unit 防锈装置 ring earth electrode 环形接地极 combined SPD for power supply /供电系统复合SPD combined SPD for IT system/ IT系统复合SPD ground earth-termination system 接地装置 detail EXFS 100 Cathodic corrosion protection 阴极防腐 electric actuator, e.g. MOV (motor operated valve) 励磁电机,如MOV(电动阀门) Insulating flange 绝缘法兰 electric actuator, e.g. MOV (motor operated valve) 励磁电机,如MOV(电动阀门) Tank,cathodic protected 罐区,阴极保护 insulating flange 绝缘法兰 protected cabling 受保护线缆 MEB ? 2006 DEHN + S?HNE ? 2006 DEHN + S?HNE International Standards 国际标准 Detailed provisions for the implementation of the requirements of the legislators are contained in a number of national and international standard listed as follows: 需求及执行的详细规定包含在下列国家和国际标准中: EN 60079-14; DIN VDE 0165 Teil 1 08/98: ?Installation of electrical equipmentin hazardous areas“; Issue 8/1998 危险区域电气设备安装 EN 60079-17; DIN VDE 0165 Teil 10; Issue 08/99: ?Electrical equipment for hazardous areas“; Part 17 - Testing and maintenance 危险区域电气设备安装, 第17部分—测试及维护 EN 60079-10; DIN VDE 0165 Teil 101; Issue 09/96 : ?Electrical equipment for areas with gas hazard“; Part 10 - Classification of hazardous areas 危险气体区域电气设备, 第10部分—危险区域分级 EN 1127-1; Issue 08/97 : ?Potentially explosive areas - explosion protection“; Part 1: Principles and methods 潜在的爆炸区域—爆炸防护,第1部分: 原则及方法 What should we do in case of lightning and surge protection in hazardous areas?危险区域雷击和电涌防护实施过程 Assess a risk 评估风险 risk management in acc. with IEC 62305 -2 风险管理 create dokumentation on explosion protection 建立爆炸防护文档 Implementation of Lightning and Surge protection measures 配置雷击及电涌防护措施 What should we do in case of lightning and surge protection in hazardous areas?危险区域雷击和电涌防护实施过程 Assess a risk 评估风险 ?Look for Sources of Ignitions“ 寻找点火源 Sources of Ingnitions in acc. with EN 1127-1点火源,根据EN 1127-1 Oil refinery Pertamina, Cilacap/Java,