【2017年整理】环氧导电腻子的用途和数据.docVIP

Intended Uses 用途 适用于防静电地坪面漆涂装前对地面进行铺平处理，以获得平整导电表面和有利涂装后道防静电面漆。 Used to repair and fill up the floor surface before painting with antistatic finish in order to provide smooth conductive surface for next coat. Product Information产品简介 具有优良的刮涂性，能厚刮，干燥后不收缩，不开裂，施工方便，涂层附着力强，强度高，电阻率低、表面细腻。 It can be applied by doctor blade. Thick film may be obtained. After drying, no contraction or crack takes place to the film. Easy to be applied. The film possesses good adhesion, high strength, and small electric resistance. Its apperance is smooth. Application details 产品数据 Volume Solids 固体份 90% Color 颜色 Black 黑色 Dry Flm Thickness干膜厚度 Depending on substrate smoothness. High thickness of film can be made with doctor blade method, if necessary. 与地面平整度有关该腻子可以根据平整度刮厚 Theoretical Coverage 理论涂布率 8.3-12.5 m2/kg（0.08-0.12 kg/ m2）），based on one coat with doctor blade application 刮涂一道为8.3-12.5 m2/kg（0.08-0.12 kg/ m2　） Practical Coverage 实际涂布率 Allow appropriate loss 允许适量损耗 Storage and Handling 施工详述 Mix Radio 混合比 A : B=5:1(by weight) 甲:乙=5:1 Method of Application 施工方法 Doctor Blade 刮涂 Recommended 推荐采用 Pour the mixture on the floor and apply quickly with Doctor blade 将混合好的浆料倒在地板上，尽快刮平 Airless Spray 无空气喷涂 Unsuitable 不适用 Brush or Roller 涂刷或辊涂 Unsuitable 不适用 Conwentional Spray 传统喷涂 Unsuitable 不适用 Thinner 稀释剂 Ingenral, uncessary. If necessary, use C003 一般不需要，如需要使用 C003 Cleaner 油漆设备清洗剂 C003 Pot Life 使用期 For Summer 夏用型：35℃：20-35 min; 25℃:30-45min For Winter 冬用型：15℃：30-45min; 5℃:45-60 min Storage 贮存期 One year 一年 Drying time 干燥时间 Substrate Temperature 底材温度 Touch Dry 表干 （h） Hard Dry 硬干 (h） Fully Curing 完全固