【2017年整理】电动机安全拆运作业程序.docVIP

HYPERLINK HYPERLINK HYPERLINK HYPERLINK 电动机安全拆运作业程序 Operating procedures and content: 工序1 修前图纸资料准备 S working procedure 1 drawings preparation before repairing 准备好设备检修所需的图纸和资料。 - ready to equipment overhaul the required drawings and data. 工序2 安全措施 S working procedure 2 security measures 办理工作票，确认工作票所载安全措施已正确执行。 - deal with working ticket, confirmation working ticket contained in the safety measures have been implemented correctly. 进入现场穿工作服戴好安全帽，高空作业系好安全带。 - enter the site to wear work clothes wear a helmet, the work high above the fasten your seat belt. 开工前，工作负责人要向工作班成员详细交待安全措施及注意事项，明确工作范围，并装设围栏。 - before construction, the work is detailed explain to members of the working class, head of the security measures and the matters needing attention, clear scope of work, and installed the fence. 工序3 电动机拆运至检修现场 S working procedure 3 motor apart to repair site 核对电动机编号并抄录铭牌，将待拆动的部件做好相应的标记。 - check the motor number and transcribing nameplate, will stay open parts of the corresponding tag. 联系热工拆开测温元件电动机侧的连接线，并做记录。 / contact the thermal apart of temperature measuring element motor side connecting line, and make records. 拆开电动机电源电缆接线和加热器电源接线，并做记录，检查电源电缆接头无过热变色，接触面平整，将其三相短路接地，并做好电缆防护措施。 - disassemble the motor power cable connection and heater power supply, and make records, check the power cable joint without overheating becomes angry, contact surface level off, the three phase short circuit grounding, and make cable protective measures. 通知相关机械班组拆开靠背轮和地脚螺丝，并做好回装记号，以及拆开电动机平台阻碍搬运的护拦。 / notify the related mechanical team apart backrest wheel and anchor bolt, and back to sign, and disassemble the motor platform block handling barrier. 清理干净检修现场后，联系起重人员起吊电动机，搬运至检修现场。 - clean after repair site, contact crane lifting motor, to the repair site. 工序4 电动机解体 S working procedure 4 motor disassembly 工作负责人向工作人员交待现场安措及特殊注意事项。 - work to staff confessed, head of site security measures and special considerations. 电动机解体前测量绝缘电阻，并做记录。 Measuring insulation resistan