hydrus说明书部分中文版.docxVIP

This tutorial considers water flow and solute transport in a simple three-dimensional transport domain. The transport domain is a relatively simple hexahedral domain with a slope in the X-direction. Dimensions of the transport domain are 1000 * 250 * 200cm and there is a groundwater 100 cm below the soil surface. There is a source of water and contaminant at the soil surface. The problem is divided into two parts. In the first part, the geometry of the transport domain and its discretization is defined and initial and boundary conditions are specified. In the second part, final pressure head profile from the first run is imported as an initial condition, and pulse of solute is added into the surface source. The example thus again demonstrates how results of a previous simulation can be used in follow-up calculations with different boundary conditions or having additional features. Users will learn how to define a simple threedimensional transport domain and how to use Sections when defining initial and boundary conditions. Users will also learn various ways of viewing transport domain and simulation results.本教程认为在一个简单立体交通领域的水流，传送域是一个在X方向有斜角的相对简单的六面体，传送域的尺寸是1000* 250 *200厘米，100厘米以下的土壤表面有一个地下水。问题被分为两个部分，在第一个方面，传送域及其离散化的几何形状被确定，初始条件和边界条件被指定。 这样的例子再次证明了先前模拟的结果如何被应用于后续计算不同的边界条件，或具有其他的附加功能。用户将学习如何定义一个简单的三维传输域，以及如何使用章节定义初始条件和边界条件。用户也将学习各种方式查看运输域和仿真结果。时间信息Time UnitsTime units [T] to be used throughout the application (days, hours, min, sec). When units are changed during or after data entry, then all input variables are converted automatically into the new units.时间单位可以在整个应用程序中使用（天，小时，分钟等等）。当在数据输入以后时间单位改变，那么所有输入的将自动转化为新的时间单位。Initial Time?Starting time [T] of the calculation.计算起始时间。Final TimeFinal time [T] of the calculation.计算最终时间。Initial Time StepInitial time increment, dt [T]. The initial time step should be a function of the type of problem being solved. Problems with high pressure gradients (e.g., infiltration into an initially dry soil) and for soils with highly nonline