qt4.6.3我移植的参考文档-TX2440mini2440.docVIP

qt4.6.3我移植的参考文档 将qt-everywhere-opensource-src-4.6.3.tar.gz直接解压后复制2分，分别命名为pc、armqt-everywhere-opensource-src-4.6.3 X11 qt-everywhere-opensource-src-4.6.3# ./configure -no-openssl -nomake demos -nomake examples -nomake doc make make install vi /etc/profile /usr/local/Trolltech/Qt-4.6.3/bin source /etc/profile arm qt-everywhere-opensource-src-4.6.3-arm#./configure -embedded arm -no-mouse-linuxtp-qt-mouse-tslib -I/usr/local/tslib/include -L/usr/local/tslib/lib -no-qt3support -no-openssl -nomake demos -nomake doc -nomake tools -qt-gfx-transformed –lrt 第二次移植 ./configure -embedded arm -no-mouse-linuxtp-qt-mouse-tslib -I/usr/local/tslib/include -L/usr/local/tslib/lib -no-qt3support -no-openssl -nomake demos -nomake doc -nomake tools -qt-gfx-transformed -lrt make make install 为支持触摸屏，开机自动设置环境变量，在2440的 /etc/profile中追加：export LD_LIBRARY_PATH=/usr/local/lib:$QTDIR/lib:$LD_LIBRARY_PATH??????????????????????????????????????????????????export TSLIB_ROOT=/usr/local/lib????export TSLIB_TSDEVICE=/dev/input/event0export TSLIB_FBDEVICE=/dev/fb0??export TSLIB_PLUGINDIR=/usr/local/lib/tsexport TSLIB_CONSOLEDEVICE=noneexport TSLIB_CONFFILE=/usr/local/etc/ts.confexport POINTERCAL_FILE=/etc/pointercalexport TSLIB_CALIBFILE=/etc/pointercalexport QWS_MOUSE_PROTO=Tslib:/dev/input/event0取消/usr/local/etc/ts.conf中的第一个注释： ?(2011-04-02 22:41:00) 转载▼ arm开发板 ? 命令 ? 超级终端 ? 可执行文件 ? 环境变量 ? it 分类：?QT编程 ?1、在ARM开发板上运行QT4程序 ?????要有跟ARM开发板上的QT根文件系统相同版本的QT开发环境，并且还要编译成embedded arm版本的，设置环境变量： #vi setenv.sh export QTEDIR=/usr/local/Trolltech/QtEmbedded-4.6.3-arm export PATH=/usr/local/Trolltech/QtEmbedded-4.6.3-arm/bin:$PATH export LD_LIBRARY_PATH=/usr/local/Trolltech/QtEmbedded-4.6.3-arm/lib:$LD_LIBRARY_PATH 不知道为什么，这个文件好像没什么用，我还是用的全路径编译/usr/local/Trolltech/QtEmbedded-4.6.3-arm/bin/qmake  ?????我的实例程序是叫?hello.cpp ，编译用下面命令： #/usr/local/Trolltech/QtEmbedded-4.6.3-arm/bin/qmake -project #/usr/local/Trolltech/QtEmbedded-4.6.3-arm/bin/qmake? #make 把 hello 下载到开发板上首先要给 hello