烘缸计算报告.docVIP

CALCULATIONS FOR GRAY CAST IRON DRYING CYLINDERS OF PAPERMAKING MACHINERY 材料为灰铸铁的造纸机烘缸的计算 ASME code year: 2010 美国机械工程师协会标准：2010 Contract： 合约： Cylinder Diameter: shell length: 烘缸直径： 3660mm 缸体长度：3100mm Maximum Design Pressure:0.75 Mpa 最大设计压力：0.75Mpa Maximum Working Pressure:0.68 Mpa Hydrostatic Test Pressure:1.5Mpa 最大工作压力：0.68Mpa 静水压试验压力：1.5Mpa Shell Material: SA-278 CLASS 45 GCI Head Material: SA-278 CLASS 45 GCI Jornal Material: SA-395 CLASS 60-40-18 Stay Material: SA-278 CLASS 45 GCI 缸体材料： SA-278 CLASS 45 GCI 缸盖材料： SA-278 CLASS 45 GCI 轴头材料： SA-395 CLASS 60-40-18 五通材料： SA-278 CLASS 45 GCI Dryer Safety Analysis 烘缸安全性能分析 Summary 摘要 A detailed stress analysis was completed to calculate the critical design and operating stresses in this dryer manufactured of Gray Cast Iron(GCI). The general design stress requirements for GCI are specified in the ASME Pressure Vessel Code, Section Ⅷ, Division 1, under section UCI. Additionally , section U2(g) indicates that when specific instructions are not available in the ASME Code for safe allowable stress limits, the manufacturer is responsible for establishing the necessary analysis, design and manufacturing processes that meets the intent of the ASME Code to use appropriate methods that produce a safe design, of which entail empirical and theoretical considerations. Utilizing mature analysis tool, such as the Finite Element Method(FEM), a very detailed analysis algorithm was followed to confirm that this dryer met the empirical and theoretical safe operating guidelines. It is concluded from the analysis result that the design of this dryer meets all the specific and general guidelines of the ASME Code in Section Ⅷ,divisionⅠ. 完成了材料为灰铸铁和球墨铸铁烘缸的应力计算分析，考虑了设计中临界工况和烘缸在运行中的工况。设计中的应力要求主要是由ASME压力容器规范第Ⅷ，第1卷，灰铸铁（GCI）章节中指定的。此外，章节U2中说明，当ASME压力容器规范对于材料的最大许用应力未作具体说明时