超高速试验机动力学研究.docxVIP

The Research on the Dynamics of High-speed Friction and Wear Test System in Mechanical EngineeringKey words:Ultra-high-speed rotation; Friction and wear;Scrape;DynamicsAbstract.By researching the dynamics of high speed friction and wear test system, establish the statics and dynamics model of high-speed dial and get the equation of motion of turntable scrapers state. Using Ansys Workbench software platform analysis the order modal of the turntable, get the kinetic parameters of the system. Some suggestion and methods are proposed on avoiding vibration of turntable system.IntroductionAbradable coatings are mainly used to reduce the gap between rotating parts and machine box of the aero-engine,can effectively improve the power and thrust of the turbine engine. At present，the performance evaluation of abradable coatings including:abradability，erosion resistance,thermal shock resistance, high temperature oxidation resistance,the bonding strength between the coatings and the matrix and so on[1-2],the mainly method to evaluate coating performance is simulating the high speed and high temperature working environments,the research of the high speed friction and wear test system is aimed to evaluate coating performance.As the core components of the high speed friction and wear test system, the dynamic performance of the ultra-high speed rotary system directly affects the working stability and reliability of the whole system.Rotating disk is one of the basic mechanical components widely used in rotating machinery. At present,the research of the dynamics of the rotor system is widely done,mainly concentrates in the method of the rotor dynamic balance and the rubbing phenomenon during rotor operation process,it aims to optimize the rotor structure to reduce the friction of vibration and dynamic balance. To realize the coating skiving experiment, high speed rotary table of the ultra-high speed friction and wear test system is not only affected by factors such as support bearing,