CardBerry specification【DOC精选】.doc

Ltd. M-Retail Universal Discount Card CardBerry CARD SPECIFICATION 2014 Contents General information; Card functionality and objectives; Operating conditions; Constructive requirements; Power requirements; Schematics and BOM; Testing requirements; Documentation; Testing requirements; Certificates; Function of the contact group magstripe; Function of the contact group in the card upper corner (when necessary); Software and algorithm; Package Contents; Additional information. Annex 1 General information The specification contains description of the technical device for imitation of magnetic stripe of various discount cards. Similar cards already exist, but they have more functions, which include electronic payment, here are some examples: / / Corporate client is Ltd. M-Retail, hereinafter referred as Client. Planning time to start manufacturing - February 2014. Manufacturing period - 1 month. First produce samples for testing - 10 pcs and then mass production of 100,000 pcs. Payment can be made via TT with prepayment and the final settlement after the manufacturing (the % of prepayment is to be discussed). Card functions and objectives Electronic card CardBerry is designed to replace all discount and bank cards with magnetic stripe. Operating conditions In most cases, the card will be used indoor in shopping malls and shops withing temperatures between 10 - 35°C. The card storage, carrying it in wallet or purse, from -25°C in winter time and up to +50°C during the summer. Constructive requirements Visually the card must be identical to the regular plastic discount card, must have the same form and the outer coating. The only difference will be the contact group stripe placed on the surface of the card. The dimensions: Length – 86 mm; Width – 54 mm; Thickness –0.8 mm (is possible to 0.9 mm). The card must have embossed (if technically possible) or written personal identification numbers and have the design provided by