原创力文档- 1、本文档共10页，可阅读全部内容。
- 2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
- 3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
- 5、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
- 6、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
- 7、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 8、VIP文档为合作方或网友上传，每下载1次， 网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
Engineering Query
常见问题的英文问题纸：
No. Problem SuggestionConfirm1. No fabrication standard provided by the customer. 未提供制作标准。Will follow IPC-A-600F IPC-6012 class 2.2. No general fabrication tolerance specified as below shown:
(a) finished board thickness
(b) outline dimensions
(c) finished hole diameters
(d) big hole diameter(Φ9.0 mm)
(e) slot sizes
(f) Internal corner radius when routing
未提供常见的板厚，外形，孔径，大孔，坑槽，内角的公差。Finished as below shown:
(a)T+/-0.xxmm
(b)+/-0.15mm
(c)+/-0.10mm
(d)+/-0.127mm
(e)+/-0.127mm
(f) R1.2mm (max)3. Didnt specify:
1). surface treatment;
2). finished board thickness;
3). finished copper thickness
未注明表面处理，完成板厚，铜厚Finished as below shown:
1). HASL;
2). 1.6+/-0.15mm;
3). Inner layers 1 oz,
outer layers 1 oz.4. No outline dimensions provided by the customer. 未提供外形尺寸We will build as per gerber data as att.x shown.5. The standard for tolerance of outline dimensions (or hole size, Twist/Warp, etc) is strict for us. (Please see att.x )
外形尺寸 (或孔径等)的公差较严Relax it to be xxx.
6. Some holes attributes (plated or non-plated) werent specified by the customer. 未注明孔的属性We will produce as per att.x shown.7. There are some plated through holes (Φ mm) without circuit pads on both sides. 一些镀通孔表面无线路PAD (a) We will build them as PTH without
annular ring.
Or (b) We will build them as NPTH.8. There are some non-plated holes (Φ mm) with circuit pads larger than hole diameter (Φ mm) on both sides.
一些非镀通孔表面有比孔大的线路PAD(a) Delete the circuit pads.
Or (b) Trim pads to keep 10 mils
clearance away from hole edges.
Or (c ) Leave as is but well 2nd drill the
holes.9. There are no full holes to be used as punching (or routing) tooling holes.
无足够的工具孔可作为啤板(锣板)
管位孔。Will add x holes to be tooling holes at breakaway tabs (or in unit).
(see att.x)10. In order to balance plating and obtain more even board thickness after pressing, well add thieving copper on breakaway tabs on all layers.
加抢电铜皮于各层拗板边。Please confirm.11. To decrease short/ope
文档评论（0）