GPP TSG-CT【DOC精选】.doc

3GPP TSG-CT1 Meeting #43 Tdoc C1-061883 Da Lian, China, 28 August – 1 September 2006 revision of C1-061907 CR-Form-v8 CHANGE REQUEST ( 24.008 CR 1099 ( rev 2 ( Current version: 7.4.0 ( For HELP on using this form, see bottom of this page or look at the pop-up text over the ( symbols. Proposed change affects: ( UICC apps( ME X Radio Access Network Core Network Title: ( Implementation option to improve the performance of MM/GMM signalling procedures Source: ( Ericsson, Motorola Work item code: ( TEI7 Date: ( 01/09/2006 Category: ( C Release: ( Rel-7 Use one of the following categories:F (correction)A (corresponds to a correction in an earlier release)B (addition of feature), C (functional modification of feature)D (editorial modification) Detailed explanations of the above categories canbe found in 3GPP TR 21.900. Use one of the following releases:Ph2 (GSM Phase 2)R96 (Release 1996)R97 (Release 1997)R98 (Release 1998)R99 (Release 1999)Rel-4 (Release 4)Rel-5 (Release 5)Rel-6 (Release 6)Rel-7 (Release 7)Rel-8 (Release 8) Reason for change: ( In the current version of the 3GPP specifications, the CS signalling connection release or the RRC connection establishment failure (either normal release or RRC connection failure) prior to completion of the CS procedure is considered to be a lower layer failure. Similarly, in Iu mode, the PS signalling connection release or RRC connection establishment failure (either normal release or RRC connection failure) prior to completion of the PS procedure is also considered to be a lower layer failure. In Iu mode, all this leads to some unnecessary delays in completing the procedures, and impacts the user, where both CS and PS signalling connections use the same RRC connection. Note that in the field it was seen that a PS procedure gets intiated over an existing RRC connection which was established for a CS procedure, and then usually, the RRC connection is released