Iron-Carbon Part【DOC精选】.doc

Inspector Knowledge Series 01-0 An Introduction – Metallurgy Teach yourself phase diagram The Iron-Carbon Phase Diagram 材料基础-铁碳金相认识 图文简易教材第一课-铁碳平衡图 Descriptive approach- Part 1The Iron-Carbon Equilibrium Diagram Mok Chek Min 莫泽民 RIG/PLANT In house training ADDITIONAL CODE SDRL CODE TOTAL PGS 24 REMARKS MAIN TAG NUMBER DISCIPLINEMetallurgy CLIENT PO NUMBER CLIENT DOCUMENT NUMBER   REVISION HISTORY 01 15.08.2008 For Approval CMM Rev Date (dd.mm.yyyy) Reason for issue Prep Check Appr CHANGE DESCRIPTION Revision Change description 01 For Approval Content: Introduction to The Iron-Carbon Equilibrium Diagram Part 1 以下为Word 控件-运用控件工具箱点击退出设计模式 不要点击 X /. Do not click X, click 点击 退出 Exit Design Mode The movies, which are in MPG format, show the movement of dislocations in ferritic steels (body-centred cubic crystal structure), at elevated temperatures. The images are taken in a hot-stage in a transmission electron microscope. These observations have been used to conclude the molybdenum and tungsten have the same solid-solution strengthening effect on ferrite. Interactive exercise http://www.soton.ac.uk/~pasr1/index.htm .uk/steelmatter/metallurgy/default.htm Allotropy 同素异形 Allotropy is a behavior exhibited by certain chemical elements: these elements can exist in two or more different forms, known as allotropes of that element. Iron represents perhaps the best-known example for allotropy in a metal. There are three allotropic forms of iron, known as alpha, gamma, and delta. As molten iron cools down it crystallizes at 1538°C into its delta allotrope, which has a body-centre cubic (BCC) crystal structure. As it cools further its crystal structure changes to face centre cubic (FCC) at 1394°C, when it is known as gamma-iron, or austenite. At 912°C the crystal structure again becomes BCC as alpha-iron also known