产品概述.pptVIP

Hypertherm Thermal Powermax190c? Drag-Gun? 重量 46 lbs (21 kg) 55 lbs (25 kg) 暂载率 35% 30% 结构 斩波器 Drooper降压器 高频启动 无 有 喷嘴屏蔽 可选 无 易损件储存箱 有 无 扳机割炬 有 无 割炬流后冷却 有 无 系统故障指示灯 有 无 Click here to continue on to Powermax350Powermax350 In the integrated compressor market the primary competitor for the Powermax190c is the Thermal Drag-Gun. We have conducting extensive testing on this product to better understand how it performs, but more importantly how to sell against it. Still a relatively new market segment, the integrated compressor class has only a few competitive systems. This Powermax190c is designed first and foremost with convenience in mind. The performance of this system is directly impacted by the 12-amp output and the integrated compressor - both which limit its cut capacity. These capacity ratings are based on cutting mild steel. Stainless steel capacities should be de-rated approximately 20%. Aluminum capabilities can be as much as 50% of mild steel capabilities. In our Manual Systems Test Lab we conduct a series of tests on both our own products and the competitive offerings that most closely align with our systems. The first test we conduct is a cut speed test. Conducted on recommended and maximum capacity thickness this test provides the most accurate representation of how the performance of the system will be perceived in the hands of the operator. 哈尔滨银海科技发展有限公司海宝事业部专用 HABIN UNIVERSAL TECHNOLOGY DEVELOPMENT CO.,LTD 产品概述 哈尔滨银海科技发展有限公司海宝事业部专用 HABIN UNIVERSAL TECHNOLOGY DEVELOPMENT CO.,LTD 系 统: Powermax190c 输出电流: 12 A 切割能力: 1/8” (3 mm) 推荐 3/16” (4.5 mm) 最大 概述 引入时间: 1999年 替代系统: 无 目 标: 向兴起的内置压缩机市场介绍海宝性能和可靠性 型号历史 集成的压缩机设计 内置空气压缩机可满足所有的等离子气体要求 优化的工作场所方便性 暂载率35% 全套系统仅重21公斤 创新的技术 主动电子引弧控制器 允许对金属网和栅格金属进行不间断切割而不会从切割中抽减输出电流。 高效设计使喷嘴的过度损耗降至最小。 创新的技术 创新的技术 增强的开路电压 开路电压增加到335伏以增大低线容限。 可防止工作场所伴随的加长导线或共享电路等典型情况而来的大多数问题。 创新的技术 先进的电源设计 电子电路设计为变动的功率水平提供恒电流控制 基于斩波器的电源可提供卓越的能量效率。 电源 输入电压: 120V, 1 PH, 60 Hz, CSA 230V