楼板变形对框支剪力墙结构框支柱受力性能的影响研究.pdf

摘 要 在水平荷载作用下，考虑楼板平面内刚度有限时,楼面在自身平面内会产生变形, 从而造成抗侧力构件分配的水平力与按楼板刚性计算时相比有较大差别。带转换层 的高层结构，由于竖向抗侧力构件不连续，楼板在进行结构内力重新分配时承担了 较大剪力，将会产生明显的平面内变形。本文对楼板发生平面内变形时框支柱剪力 的变化规律进行了探讨。 论文在对考虑楼板变形时带转换层高层结构的研究现状和《高层建筑混凝土结 构技术规程》为保证楼板刚性对转换层楼板所作的相关规定进行综述的基础上，结 合楼板剪切刚度公式，归纳了影响楼板平面内变形的主要因素；应用 ETABS 有限元 程序，通过逐步改变楼板长宽比，建立不同的对比分析模型，研究楼板长宽比变化 对楼板平面内变形的影响及其影响规律；分析了楼板变形时的框支柱的水平剪力的 改变及其规律。 研究表明：考虑楼板变形后计算的框支柱剪力比按照刚性假定计算的框支柱剪 力大，框支柱剪力随着楼板平面内变形的增加而迅速增大；减小剪力墙间距和增加 落地剪力墙数量是控制楼板平面内变形的最为有效地手段；转换层及其上下相邻层 楼板平面内变形大小对两种不同假定下框支柱剪力值计算结果具有决定性影响。 关键词：部分框支剪力墙结构 框支柱 落地剪力墙 转换层 剪力 楼板平面内变形 I Abstract Considering the limited in-plane floor rigidity, horizontal load will cause in-plane deformation of floor slab, and it will make the horizontal load distributed to lateral force-resisting much different from that is calculated under the assumption of rigid floor. As to high-rise building with transfer story, because of the discontinuity of lateral force-resisting, the floor bears large shear force in plane, and produces significant in-plane deformation. In this paper, the change law of shear of frame-supporting column is discussed when in-plane deformation happens. In this thesis, research status of high-rise building with transfer story is reviewed fist, and related regulations in Technology Standard of High Rise Concrete Structure Building about transfer story floor in order to ensure the floor rigidity is also summarized. Considering shear stiffness formula, main factors which effect in-plane floor deformation are generalized.The finite element models are established by ETABS. Control the in-plane deformation by changing the width of the building, and the change l