电池后盖散热片注射模设计【毕业论文+CAD图纸全套】.doc

摘 要 本文主要介绍了散热盖的结构特点, 详细阐述了散热盖凸模、凹模、斜滑块结构及它们的技术难点。在此次设计中，主要用到所学的注射模设计、机械设计、工程材料及热处理和SolidWorks及注塑模设计插件Imold等方面的知识。着重说明了设计一副注射模的一般流程，即注射成型的分析、注射机的选择及相关参数的校核、模具的结构设计、注射模具设计的有关计算、模具总体尺寸的确定与结构草图的绘制、模具结构总装图和零件工作图的绘制、全面审核投产制造等。 塑件结构比较简单，设计中使用模具工具对塑料产品进行修补，然后对其进行分型设计。零件下部的倒钩结构是一种典型的模具设计产品结构，在设计的过程中也进行了详细的描述。型芯的多凸起结构不便于机械加工，这里采用电极设计，采用放电加工的方法来实现加工。 关键词：散热盖、注塑模、凸模、凹模、斜滑块、SolidWorks、imold Abstract: In the paper introduces the structure characteristics, heat cover expounds heat punch, covering dies.the technoloy block structure and them, the technical difficulties. In this design, the main use of injection mould design, mechanical design, engineering, materials and heat treatment and SolidWorks injection molding design and the knowledge of the respect such as imold plug-ins. Focus on the design of injection mould, vice general process, namely the analysis of injection molding injection machines, the choice and the related parameters of checking, die structure design, the design of injection mould related calculation, the overall size of the mould structure and determine the sketch rendering, die structure and assembly parts working drawing, comprehensive review production manufacturing, etc. Parts structure is simple in design, mould tool used to plastic products, and then to type design. Parts of the overhead structure is a typical kind of product structure, mould design in design process are described in detail. The core structure is more easy machining raised by electrode, here, the design discharge machining methods to realize processing. Keywords: heat cover, injection molding, punch and die, oblique slippery pieces、SolidWorks、imold 目 录 1 概述 1 1.1 模具概述 1 1.2 我国塑料模具现状及发展趋势 1 2 塑料选择及塑件工艺结构分析 2 2.1 塑料选取及塑料特性分析 2 2.2 塑件的结构工艺性分析 2 3 模具设计 5 3.1 注射机的选择 5 3.1.1注射机型号的确定 5 3.1.2型腔数量的确定和校核 5 3.1.3注射量校核 6 3.1.4注射压力的校核 6 3.1.5开模行程的校核 6 3.2 浇注系统设计 7 3.2.1塑料制件在模具中的位置 7 3.2.2浇注系统的设计 8 3.3 排溢系统的设计 10 3.4 成型零件的设计 10 3.4.1成型零件的结构设计 10 3.4.2成型零件工作尺寸的计算 11 3