小喇叭罩注塑模具设计【毕业论文+CAD图纸全套】.doc

摘 要 塑料工业是当今世界上增长最快的工业门类之一，而注塑模具是其中发展较快的种类，。因此，研究注塑模具对了解塑料产品的生产过程和提高产品质量有很大意义。 本设计介绍了成型的基本原理，特别是单分型面注射模具的结构与工作原理，对注塑产品提出了基本的设计原则；详细介绍了冷流道注射模具浇注系统、温度调节系统和顶出系统的设计过程，并对模具强度要求做了说明。详细地叙述了模具成型零件包括 通过本设计，可以对注塑模具有一个初步的认识，注意到设计中的某些细节问题，通过对PRO的学习，可以建立较简单零件的零件库，从而有效的提高工作效率。Abstract Plastic industry is one of the fastest growing in the world today, and the injection mold is one of the types of rapid development, which accounts for about 30% in the mold industry, the market in the next mold, plastic mold in the proportion will gradually increase the total amount of mold, mold development speed will be higher than other. Therefore, research to understand plastic injection mold production process and improve the quality of products have great significance. This paper introduces the design of the design process and machining process of small horn cover of plastic mould, including the analysis of plastic material, the process analysis of plastic parts. And process analysis of plastic parts size precision and analysis technology of structure performance of plastic parts, plastic parts, plastic parts of the analysis and the surface quality of plastic parts. Also describes the basic principle of molding, especially the structure and working principle of single injection mold parting surface, put forward the basic design principles of injection molding products; details of the cold runner injection mold gating system, temperature regulation system and the top the system design process, and die strength requirements below. In addition, also describes in detail the process of molding parts including cavity, core. Through this design, can have a preliminary understanding of the injection mold, pay attention to the details of the design, through the study of PRO/E, you can create a simple parts library, to improve work efficiency. Keywords: plastic injection molding process 目录 绪论 7 1 塑料的工艺性分析 8 1.1 分析塑件的使用材料及其工艺特性 8 1.1.1 ABS的基本特性 8 1.1.2 ABS的成型特性 9 1.2 塑件的综合性能分析 9 1.2.1 塑件的使用性能和