攻丝机床毕业设计书说明书.docVIP

变速器壳体卧式双面专用攻丝机床设计 [摘要]专用机床是用按系列标准化设计的通用部件和按加工零件的形状及加工要求设计的专用部件组成的机床。其通用部件已经标准化和系列化， A Horizontal Type’s Two-sided Special Use Tapping Machine Tool Design for Light Vehicle’s Gearbox [Abstract]A Special Purpose Machine is designed by the series of standardized common components and parts by processing the shape and design of special processing requirements of the special machine tool components. Its generic components have been standardized and serialized, the application can be selected, greatly shortened the design and manufacturing cycle. Combination of machine tool with low cost, high efficiency characteristics, Therefore a large number of extensive production of a large number of applications. And as technology advances, degree of automation and CNC continuously improved. This paper mainly introduces the combination machine tool designed for tapping holes in link surface of gearbox casing of light vehicles. It includes the total project design of the machine, the selection of general use parts, the design of spindle box etc. The process of selecting in general use parts and the principle and process of selecting the spindle box is elaborated on, and the strengthen of the shaft were analyzed in detail. Drew tool machine to always pack a diagram, principal axis box the wheel gear Nie match a principle diagram, principal axis box total assemble diagram and necessary spare parts diagram etc., and made use of limited dollars analytical software to carry on dependable sex analysis to the tool machine main parts. [Keywords] Gear-housing Special Purpose Machine Tapping Spindle  目 录 第1章 绪论 1 1.1 专用机床的定义、组成以及特点 1 1.2 专用机床的现状以及发展方向 1 1.3毕业设计的内容 2 第2章 专用机床的总体设计 4 2.1 专用机床工艺方案的确定 4 2.1.1 确定专用机床工艺方案的基本原则 4 2.1.2 加工工艺分析 4 2.1.3 定位基准的选择 5 2.2 专用机床切削用量的确定 5 2.2.1 切削用量的选择 6 2.2.2 确定切削力、切削扭矩、切削功率及刀具寿命 6 第3章 专用机床的主轴箱设计 8 3.1 概述 8 3.1.1主轴箱的用途与分类 8 3.1.2主轴箱的组成 8 大型通用主轴箱在生产中应用很广，常见的有： 8 3.1.3主轴箱通用部件 8 3.2主轴箱的设计步骤和方法 10 3.2.1 主轴箱设计的原始依据图 10 3.2.2 主轴结构、轴颈尺寸及齿轮模数的确定 11 3.2