SN8P2711-C语言程序例子.docVIP

SN8P2711-C语言程序例子 /*C************************************************************************ * 文件名: gyyls_voltage.c *-------------------------------------------------------------------------- * Copyright (c) CAESAR *-------------------------------------------------------------------------- * 创建: CAESAR *-------------------------------------------------------------------------- * 版本: V1.0 *-------------------------------------------------------------------------- * 日期: *-------------------------------------------------------------------------- * 功能: * * *-------------------------------------------------------------------------- * 说明: * **************************************************************************/ /*__包含文件_____________________________________________________________*/ #include SN8P2711.h #include compiler.h #include temperature_displayer.h /*__变量定义_____________________________________________________________*/ Uint16 vol_ad1; Uint16 time_10ms; Uint16 time_1sec; Uchar temperature_low_segment; Uchar temperature_high_segment; //Uint16 temp16; //Uint16 voltage; //Uchar temp320_a; //Uchar temp321_a; //Uchar temp320_b; //Uchar temp321_b; //Uchar x1,x2,x3,x4; Uint16 __ROM NTC_TABLE[]= { 3035, 3001,2965,2930,2894,2858,2821,2784,2747,2709,2671, 2633,2594,2556,2516,2478,2438,2399,2360,2321,2281, 2243,2203,2164,2125,2086,2048,2010,1972,1934,1896, 1859,1822,1786,1750,1714,1678,4090,1609,1575,1541, 1508,1475,1443,1412,1380,1350,1319,1290,1261,1232,1204, 1176,100, }; s_bit_variable flag_together; Uchar __ROM CODE_TABLE[]= { 0x11, //0 0xDB, //1 0x0D, //2 0x0B, //3 0xC3, //4 0x23, //5 0x21, //6 0x9B, //7 0x01, //8 0x03, //9 0x10, //- 0x25, //E 0xff, }; /*__宏定义_______________________________________________________________*/ #define flag_byte flag_together.byte #define ADC_YN 0 #define DISPLAY_1SEG_YN 1 #define TEMPERATURE_GET_YN 2 #define VOL_CAL