PDA的基础操作.docxVIP

PDA基本操作1、启动扫描头我的设备\Application\SCANWEDGE2、启动网络连接我的设备\Windows\程序\Fusion\WCLAUNCH3、为扫描加回车键，方便扫描触发事件。如图进入Config\Setup\设置界面。勾选 Send ENTER key after suffix。4、修改默认输入法为英文如图勾选“键盘”，然后勾选隐藏输入面板5、修改配置文件我的设备\ProgramFiles\trczwork6、打开网络连接 Log On/Off7、修改密码点击F6 键8、程序报错处理SCAN_SetReaderParamsThe message indicates the portable cannot enable the scanner. You will need to follow the warm boot instructions for the manufacturer of your portable device. After warm booting the device test scanning again. If you still receive the same error in our application, contact the manufacturer of the portable and have them wa