ertmsetcs–class1.doc

ERTMS/ETCS – Class 1 Functional Requirements for an on board Reference Test Facility REF? : SUBSET-094-0 ISSUE?: 2.0.2 DATE : 05/02/2009 Company Technical Approval Management approval ALSTOM ANSALDO SIGNAL BOMBARDIER INVENSYS RAIL SIEMENS THALES Modification History Issue NumberDate Section Number Modification / Description Author 0.0.1 13/01/2003 All First draft Raúl Martín, Daniel Molina 0.0.2 15/02/2003 All Comments from the Madrid Meeting (08/02/2003) included Raúl Martín, Daniel Molina 0.0.3 05/03/2003 All Comments from the Braunsweig Meeting (21/02/2003) included Raúl Martín, Daniel Molina 0.0.4 09/04/2003 5.1.1.1.1 5.1.1.1.5 5.2.4.1.3 5.2.4.1.2 5.2.4.2.2 5.2.18 7.1.1.1.1 8.1.1.1.1 Comments from the Brussels Meeting (18/03/2003) and Paris Meeting (03/04/2003) included Raúl Martín 1.0.0 14/04/2003 Change of the version number for delivery Raúl Martín 1.0.1 05/10/2005 5.2.5.2 5.2.7.2 5.2.13.1 8 Comments from NoBos and update of Configuration Version. Daniel Molina 1.0.2 5.1.1.1.5, 5.2.4.1.1, 5.2.4.1.2, 5.2.5.2.1, remove 10 and 11.2 Comments from the WG partners Daniel Molina 2.0.0 04-November-2004 Edition for delivery after acceptance of the UNISIG Test Specs WG members Daniel Molina and Raúl Martín (CEDEX) 2.0.1 14-April-2008 4.1.1.1.2 5.2.10.1.3 5.2.10.1.4 5.2.10.1.5 5.2.13.1.6 8.1.1.1.1 Alignment to SRS 2.3.0 and some minor additions Daniel Molina and Miguel Fernández (CEDEX) 2.0.2 3.1.1.1.1 3.1.1.1.2 4.1.1.1.1 4.1.1.1.2 4.1.1.1.3 5.2.13.1.2 8.1.1.1.1 Editorial corrections. Update of the Configuration version and References table. Oscar Rebollo Table of Contents 1. Modification History 2 2. Table of Contents 4 3. Objectives 5 4. Introduction 6 5. Reference On Board Equipment Test Architecture 7 5.1 General Overview 7 5.2 Test Modules Definition 9 5.2.2 Scenario Generator (SG) 9 5.2.3 Scenario Controller (SC) 9 5.2.4 TIU Simulator (TIUS) 12 5.2.5 TIU Adaptor 13 5.2.6 Speed Sensor Simulator (SSS) 1