ittccomponenttestapplicationform.docVIP

ITTC Component Test Application Form Fill in this form in English except these columns Chinese required Supplier No: Supplier Name: Supplier contact: (English Chinese) Phone/Mobile: E-mail: Address and Post Code: Contact in IKEA: Trading Office: Phone/Mobile: E-mail: Test type Please choose one test type below. Verifying test (It is for the running range. The first verifying test is from the 0-series.) Prototype test (It is for the product under development) Follow up test (The IKEA unit who orders the test with the purpose to follow up compliance.) Non-IKEA article test (The test article is not for IKEA.) Invoice Information Please fill in information for either supplier pay or IKEA pay. Supplier pay Invoice Title: Contact person: Phone/ Mobile: E-mail: Invoice Delivery Address(Only in Chinese): IKEA pay Company Name: Cost Centre: Contact person: Service required: Regular Express (40% surcharge) Shuttle (100% surcharge) Note: Condition time of surface resistance test will be cancelled if Express/Shuttle service is ticked. Sample Disposal: Not Return Return to (Freight collect): Applicant Payer Trading Others: Sample Information (Items with * are very important) If you apply for IOS-MAT-0066 tests, in the case of testing a separate component or material, there is no need to list any IKEA article numbers. In case of testing a finished article, there is no need to list other article numbers than the tested article itself. Instead, connection to article numbers should be made through correct connection of combinations in Connect (continuously updated as needed). Complete IKEA Article *Article No. : *Article Name: *Date Stamp: *Sample Amount: Raw Material *Material Description: *Material Producer: *Fitting No.: *Fitting Name: *Identification Code: *Batch Number/Production Date: *Test part: *Sample Amount: If apply IOS-MAT-0066: Surface Coating/ Covering: *Producer: *Trade name: *Ide