requirementspecifications.docVIP

REQUIREMENT SPECIFICATIONS Section A: General Specifications General The Contractor shall comply with the Specifications and all provisions in the Contract document. During the progress and upon completion of any Services or Works, the Contractor shall ensure that the site is clean and shall remove expeditiously from the site debris and rubbish generated by the Works and properly dispose of it before handing over to the University. Site Restrictions The Contractor shall note that the University remains in full operation during the whole of the Contract Period. With the presence of existing dwelling structures, dwellers, students/visitors, physical encumbrances and the site’s close proximity to other buildings and roads, the Contractor shall be deemed to have taken into consideration such site constraints and the probable effects on working hours and access. The Contractor shall ensure that the progress of the Works does not disrupt the flow of activities in the buildings and/or surrounding areas. The Contractor shall carry out a site survey and submit the site possession checklist. This completed checklist form shall be signed and returned to the University’s representative within five (5) working days prior to date of work commencement. The Contractor shall take all necessary precautions not to disturb existing wires, cables, services pipes, equipment in operation, sewers, trees, plants, flowers, etc. Any damage to such during the progress of the Works shall be made good at the Contractor’s expense. The Contractor shall make all necessary arrangement to maintain the existing facilities and have minimum of disturbances to the public and occupants. The Contractor shall deem to have allowed for all these provisions in the Contract. No claim on for these requirements shall be entertained by the University. The Contractor shall carry out the Works with due considerations on the existing site constraints at any time and under no circumstances whatso