roofinsulationspecification.docVIP

Roof Insulation Specification For: Guide Specification Siplast ZIC Roof Insulation System over Metal Deck Prepared by: Siplast, Inc. 1000 East Rochelle Blvd. Irving, Texas 75062 (800) 922-8800 This specification is provided as a general guide for use of lightweight insulating concrete products based on typical building conditions and standard roofing practices. Siplast is strictly a manufacturer of roofing and insulation systems and has no experience, training or expertise in the areas of architecture/engineering or in the area of consulting with respect to matters related to such areas. Siplast recommends that the Owners representative independently verify the accuracy and appropriateness of a specification provided for a specific project. January 1, 2011 07220 LIGHTWEIGHT INSULATING CONCRETE ROOF INSULATION revised 01/01/2011 PART 1 GENERAL 1.01 SECTION INCLUDES: A. Lightweight Insulating Concrete Application to Prepared Substrate 1.02 RELATED SECTIONS A. Section [-----] - Testing Laboratory Services B. Section [-----] - Rough Carpentry C. Section [-----] - Roof Deck D. Section [-----] - Roofing E. Section [-----] - Sheet Metal Flashing and Trim F. Section [-----] - Sprayed Fire Protection 1.03 REFERENCE STANDARDS References in these specifications to standards, test methods and codes, are implied to mean the latest edition of each such standard adopted. The following is an abbreviated list of associations, institutions, and societies which may be used as references throughout this specification section. ASTM American Society for Testing and Materials Philadelphia, PA FM Factory Mutual Engineering and Research Norwood, MA UL Underwriters Laboratories Northbrook, IL 1.04 SUBMITTALS All submittals which do not conform to the following requirements will be rejected. A. Submittal of Equals: Submit lightweight insulating concrete systems to be considered as equals to the specif