standardtextforquotationwork.docVIP

Standard Text for Quotation Work Basis of bid The purpose of tendering is to define for the operator of an installation the technical equipment which will ensure the most reliable operation and compatibility with future project requirements. This implies all-round openness and flexibility, based on a standard technology with general validity. To enable to meet this aim satisfactorily, minimal requirements for the automation system are set out below. The automation system must cover all devices and functions defined in accordance with DIN ISO 16484. Functional components are presented as separate items on the specification below. Compliance with the guidelines is mandatory and must be confirmed by providing details in the appropriate sections of the questionnaire. The omission of details will lead to exclusion from the contract allocation procedure. Proof of receipt Make of automation system Summary: 1. Instrumentation, control and  automation devices 2 2. Communication and network 3 3. Control/monitoring/visualization 4 4. Operation and maintenance 5 5. Expandability 6 6. Questionnaire 8 1. Instrumentation, control and  automation devices For life cycles longer than 15 years and high reliability, automation devices should be of an industrial quality according to IEC standard 61131-2. By the use of a controller (CPU) in the automation system and depending on the performance class, a wide variety of central digital and analogue interface modules (I/O level), it must be possible, to implement up to 1024 physical data points while maintaining full functional scope. The entire I/O level must be designed so that faulty or withdrawn modules will not hinder the remaining I/O level in its operation, or even lead to a system failure. The materials used for mounting in the control cabinet (e.g. DIN rails, clamps) must not influence operational safety, reliability or standards. Modules are specified in accordance with I/O l