wheelloader996.docVIP

Wheel Loader 996 The wheel loader is equipped with a reliable original Cummins engine, ZF transmission case and torque converter. Also, it comes with original ZF wet-type axles with multi-disc limited-slip differentials. Its KD switch assures higher efficiency and easy operation. Its 24° cone-shaped seal cylinder comes with high sealing performance. In addition, the wheel loader comes with a single brake valve, dual pipe fully hydraulic brakes and central lubrication system. Technical Specification: Overall Dimension 1 Length(with bucket on ground) 9415(mm) 2 Width(to outside of wheels) 3438(mm) 3 Bucket width 3500(mm) 4 Height(To the top of the cab) 3780(mm) 5 Wheel base 3645(mm) 6 Tread 2450(mm) 7 Min. ground clearance 461(mm) Main Technical Specification 1 Rated load 9000(Kg) 2 Operating weight 31620kg 3 Rated bucket capacity 5.1(m3) 4 Max. breakout force 202KN 5 Max. Drawing force 261 KN 6 Max. dump clearance 3300(mm) 7 Dump reach 1410(mm) 8 Dump angle at any position ≥45° 9 Digging depth 250(mm) 10 Min. turning radius (1)Outside of bucket 7511(mm) (2)Outside of rear wheel 6614(mm) 11 Pivot angle frame 40° 12 Oscillating angle of rear axle +12o 13 Lifting time of bucket 6.0(sec.) 14 Lowering time of bucket 3.4(sec.) 15 Dumping time of bucket 1.6(sec.) 16 Traveling speed(Km/h) (1)1st gear (Forward reverse) 6.4 (2)2nd gear (Forward reverse) 11.94 (3)3rd gear (Forward reverse) 18.72/25.92 (4)4th gear (Forward) 37 Diesel engine 1 Model Original Cummins M11-C335 M11-C335 2 Type Direct injection. Turbocharged. Water cooling 3 Rated output 250(Kw) 4 Inter-bore of cylinder/stroke 125/147(mm) 5 Total exhaust of cylinder 10.8(L) 6 Model of starting motor 39MT-HD 7 Power of starting motor 8(KW) 8 Voltage of starting motor 24(V) 9 Rated speed 2100(r/min.) 10 Max. Torque 1674(N.m) 11 Starting type Electric 12 Min. specific fuel consumption 215(g/Kw.h) 13 Engine specific oil consumption 1.0 (g/Kw.h) 14 Net weight 984(Kg