给水排水工程毕业设计稿.docVIP

毕 业 设 计 题 目: 指导老师： 学生姓名： 学生学号： 所属院系： 专 业： 班 级： 完成日期:  毕业论文（设计）任务书 摘要 本设计为新疆和静县输配水管网及自来水厂工艺设计，工程设计规模为66968.22m3/d。城市人口密度为200人/公顷。 该县的地形特点是北高南低，东高西低，县城平均海拔在米之间。项目区内常年主导风向为西北风。 本设计为新疆和静县某区给水初步设计。 水源采用水库取水。净水厂产水能力越7万。净水工艺采用常规处理工艺。 净水工艺流程为： 原水→管式混合器→网格絮凝池→异向流斜管沉淀池→V型滤池→液氯消毒→清水池→二级泵站→市政管网 根据原水水质及水温，絮凝剂选用聚合氯化铝，最高投药量为30mg/L。水厂绿化面积占水厂总面积的35%。出水水质符合《生活饮用水卫生标准》（GB5749-2006）。 给水管网考虑到经济性和安全性，给水管网采用树状网与环状网结合的布置形式，进行了管网最高日最高时计算，消防校核计算，事故校核计算，保证用水的安全性。 关键词：网格絮凝池；异向流斜管沉淀池；V型滤池；管网计算  Absteract： The design is for water distribution network and engineering project in the water supply plant in Hejing County, Xinjiang Uygur Autonomous Region. The scale of the design is 66968.22m3/d, the population density of the city is 200 people per square kilometer. The geological feature of the county is high in the northern and eastern part, while relatively low in other regions. The altitude of the county reaches 1047 to 1092 meters. Northwestern winds dominates in the area. The design is an initial one for a community in Hejing County, Xinjiang Autonomous Region. The reservoir serves as the source of tap water, the net water production capacity is over 70000, employing the standard process to treat the water. raw water →tube type mixer→Reciprocating baffled flocculation tank → Differential flow inclined tube sedimentation tank →V-filter →clearwell →secondary pumping station → Pipeline Network of city It will adopt flocculants made of polymeric aluminium with no more than 30mg per liter. The flocculants is decided by original water quality and temperature. The greening area covers 35% of the water supply plant. The water quality meets the demands of Hygienic Sanity Standard (GB5749-2006). Water supply pipe network considering the economy and safety, water supply pipe network using a tree network a