Solaris10与EMCCX3.10c实现FC.SAN实施手册V2.docVIP

Solaris 10与EMC CX3-10c实现FC-SAN实施手册 现场背景：服务器3台，2台Sun Fire V490，1台Sun Fire V250。存储为DELL|EMC CX3-10c，配备8TB硬盘，一台Brocade SW200E光纤交换机。 目的：实现FC-SAN构架。 拓扑图： 实施步骤： 先完成Dell|EMC CX3-10c初始化，配置两个管理IP，分别为：XX.XX.XX.XX。 建立服务器、光纤交换机、存储之间的链路。 初始化光纤交换机，配置管理地址：XX.XX.XX.XX 在Navisphere Manager管理界面发现链路。 在服务器端安装Navisphere agent注册，安装PowerPath多链路管理软件。 具体安装操作如下： Navisphere agent的安装与配置 先将光盘mount上后，再执行下面的命令： pkgadd -d NAVIAGNT.pkg 会出现下述提示信息，按照提示信息选择安装即可。 Select the packages that you want to install by doing one of the following: ?? Enter 1 (to install the host agent) or ?? Enter 2 (to install CLI) or Enter All (to install both the host agent and CLI) Enter y and y to begin the installation. The installation program looks for any agent configuration files you may already have on your system. If the program does not find any agent configuration files, then you have finished installing the agent; go to step 10q. If the program does find any existing configuration files, it displays a message like the following: At Least 1 saved config file exists for Navisphere Agent. Please select 1 of the following: [1] Restore/etc/Navisphere/.Naviagent-config.000120:105 9 [2] Restore/etc/Navisphere/.Naviagent-config.000121:140 8 [3] Quit Select number 1 - 3. 修改agent.config配置文件，主要方法如下： 修改/etc/Navisphere/agent.config Vi /etc/Navisphere/agent.config 修改内容为： # Navisphere agent.config # --------------------- # This file is used by Navisphere Agent to configure # site specific values. # # All entries in this file have this form: # # object value-list # # Where object tells what sort of information is to # be configured, and value-list is a # whitespace-separated list of values to be configured. # Samples, which should be edited, appear below for all # permissible types of objects. # # White space (tabs, space, line-feeds, # carriage-returns) and blank lines are ignored; # To continue a line onto the next line, use \ as the # last character of that line. The \ is dropped when # the next line is concatenated to the