CCITT Draft Recommendation T4 - MartinReddynet.docVIP

CCITT Draft Recommendation T4 - MartinReddynet MMM-6 RFC 804 CCITT Draft Recommendation T.4 As Defined In: CCITT STUDY GROUP XIV, CONTRIBUTION No.25-E SOURCE: DRAFTING GROUP ON DRAFT RECOMMENDATION T.4 TITLE: DRAFT RECOMMENDATION T.4 - STANDARDIZATION OF GROUP 3 FACSIMILE APPARATUS FOR DOCUMENT TRANSMISSION (as amended and agreed by Working Party XIV/2) Draft Recommendation T.4 STANDARDIZATION OF GROUP 3 FACSIMILE APPARATUS FOR DOCUMENT TRANSMISSION The CCITT, considering a. that Recommendation T.2 refers to Group 1 type apparatus for ISO A4 document transmission over a telephone-type circuit in approximately six minutes; b. that Recommendation T.3 refers to Group 2 type apparatus for ISO A4 document transmission over a telephone-type circuit in approximately three minutes: c. that there is a demand for Group 3 apparatus which enables an ISO A4 document to be transmitted over a telephone-type circuit in approximately one minute; d. that for a large number of applications black and white reproduction is sufficient; e. that such a service may be requested either alternatively with telephone conversation, or when either or both stations are not attended; in both cases, the facsimile operation will follow Recommendation T.30, (unanimously) declares the view that Group 3 facsimile apparatus for use on the general switched telephone network and international leased circuits should be designed and operated according to the following standards: 1. Scanning track The message area should be scanned in the same direction in the transmitter and receiver. Viewing the message area in a vertical plane, the scanning direction should be from left to right and subsequent scans should be adjacent and below the previous scan. 2. Dimensions of apparatus  CCITT Draft Recommendation T.4 PA