HASCO运营的管理信息系统UserAcceptanceTestSummaryReport模板.docVIP

Project Name User Acceptance Test Summary Report Current Version: Owner: Date Last Updated: Last Updated By: Author: Date Created:  Approved By: Approval Date:  Revision History Version Number Date Updated Revision Author Brief Description of Changes Instructions: For the suggested topics below, replace text within brackets with project specific information. Some of the topics may not apply to all projects. In the topics where a response is optional, a choice, [“N/A for this report”] is included in the instructions.  Table of Contents Generated Automatically. To update table based on changes in the document, select the table and hit F9. 1 Introduction 4 2 Acceptance Testing - Test Results 4 2.1 Test Build and Installation - Defect Summary 4 2.2 Build and Installation Checklist 4 2.3 Build and Installation Summary 5 2.4 Acceptance Testing - Test Cases Summary 5 2.5 Acceptance Testing - Defects Summary 5 2.6 Acceptance Testing - Test Pass Checklist 5 2.7 Acceptance Testing - Summary 6  Introduction [Document the summary of the User Acceptance test results and validate the results] Project ID: PTS ID Test Cycle Reference: Mention the Test Cycle number Number of Test Cycles Number of Test Cycles Reference Documents: E.g., Schedule for the Acceptance Testing Test Item [Summarize the evaluation of the test items. Identify the items tested, indicating their version/revision level. Indicate the environment in which the testing activities took place.] Tested Items: What has been tested. E.g., SGM.COM Version/revision Level: List all tested versions. E.g. 0.01, 0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 009, 0.10, 0.11, 0.12, 0.13, 0.14 Environment: Describe all tested environments. E.g., Integration test environment 1 which specified in integration test plan document. Location: Where is the test executing location Reference [For each test item, supply references to the following documents i