学位论文_单片机虚拟仿真x实验室的建设硬件部分.docVIP

本 科 毕 业 设 计 单片机虚拟仿真实验室的建设－硬件部分 The construction of virtual simulation laboratory microcomputer ——The hardware part 学 院： 电子工程学院 专业班级： 电子信息工程 电子092班 学生姓名： 学 号： 指导教师： 2013年 5 月 毕业设计中文摘要 摘要: 本设计为单片机虚拟实验室（硬件部分）的建立。为了能提高学生动手能力，减少建立单片机实验室成本,从而建立单片机虚拟实验室。同学们可以通过虚拟实验室完成单片机实验，通过建立的单片机虚拟实验室，深刻的了解单片机的相关知识。课题中到用了Proteus 仿真软件还有Keil 编译软件，利用两种软件，进行单片机模拟实验。两种软件功能强大，运用两种软件进行了各种单片机实验：流水灯方面、交通灯方面、开关控制方面、数码管方面、蜂鸣器方面、计数器方面、AD/DA转换方面、LED点阵方面、时钟方面等，还有就是虚拟仪器和基于图标的分析，在单片机上完成的实验，虚拟实验室大部分都可以做得到，并且虚拟仪器提供了多种仪器，可以代替许多重要仪器，充分发挥虚拟实验室的优势。能够解决在学习单片机过程中以书本上的理论知识为主要内容，实践环节比较少，而且实践过程中往往以验证实践为目的的问题，让每一个学习单片机的同学，都能够拥有属于自己的单片机“实验室”。 关键词:AT89C51，虚拟实验室，单片机 毕业设计外文摘要 Abstract: The design of MCU Virtual Laboratory (hardware) to establish. In order to improve the practical ability of students, reduce the cost of computer laboratory, so as to establish MCU virtual laboratory. Students can complete the experiment through the virtual laboratory, through the single-chip virtual laboratory based, profound understanding of SCM knowledge. Subject to use the Proteus simulation software and Keil software, using two kinds of software, MCU simulation experiment. Two kinds of powerful software, were all chip experiments using two kinds of software: water lights, traffic lights, switch control, digital tube, buzzer, counter, AD/DA conversion, LED dot matrix, the clock, there is a virtual instrument and icon based analysis, completed in the singlechip virtual laboratory experiment, most of them can be done, and provides a variety of virtual instrument, can replace many important instrument, give full play to the advantages of virtual laboratory. To solve the MCU learning process to books on the theory of knowledge as the main content, the practice is less, but in practice often objective problem to verify the practice, let every students learn SCM, can have their own computer laboratory. Keywords: AT89C51, virtual laboratory, MCU