水温自动控系统毕业论文.doc

基于MSP430F149的水温低动控制系统的设计 摘要 本设计基于计算机控制技术、传感器技术、智能控制技术、单片机技术、机电一体化论文分析了自动定量水温控制器的硬件电路、主控系统、信息感知单元、驱动单元等模块的理论设计与调试过程，并结合实际调试过程的分析，详细阐述了基于德州仪器公司生产的MSP430F149单片机的自动定量水温控制器参数的规划与实现。本设计在特色部分论文分析了以MSP430F149芯片为主，基于概率分析检测单元的设计与实现，串行扫描方式实现的人机接口，数据传输，水位控制和温度控制等内容。 本设计的理论设计方案、调试方法、测试数据分析方法及设计中的特色与创新点等对相关领域的设计与实现有一定的参考意义。 关键字：传感器，智能控制，单片机，机电一体化 ? ? ? ? ? ? ? ? ? ? ? ? ??Abstract The design of computer-based control technology，Sensor technology，Intelligent Control Technology，SCM technologyand Mechatronics Thesis of automatic quantitative analysis of the hardware circuit temperature controller,Control systems, information-aware unit, drive unit, such as the theory of modular design and debugging process, and in light of the actual debugging process analysis, detailed quantitative automatic temperature controller parameters of the planning and implementation. Part of the design characteristics of this thesis in an analysis of MSP430F149 made by the Texas Instruments chip to the main detection unit based on the probability analysis of the design and realization of the realization of the serial scanning of man-machine interface, data transmission, the water level control and temperature control and so on. The theory of theoretic design , testing measures, testing data analysis methods and design features and innovation are meaningful to the related fields such as design and implementation of a certain reference value. Keywords:sensor,intelligent control technology,MCU, SCM technologyand Mechatronics Thesis of automatic 目录 前言—————————————————————————————— 概述—————————————————————————— 1水温自动控制系统设计的时代背景——————————————— 总体设计方案—————————————————————— 2.1设计要求及主要任务————————————————————— 2.2总体设计方案———————————————————————— 第三章 硬件设计———————————————————————— 3.1传感器的选择———————————————————————— 3.1.1温度传感器的选择————————————————————— 3.1.2压力传感器的选择————————————————————— 3.2单片机的选择———————————————————————— 3.2.1功能特性说明——————————————————————— 3.2.2引脚功能说明——————————————————————— 3.3A/D转换电路—————