学位论文_消失模铸造工艺与模具制造的关系.docVIP

消失模铸造工艺与模具制造的关系 目 录 摘 要 3 关键词 3 Abstract 4 Key words 4 前 言 5 1. 绪 论 6 1.1本文研究的主要内容和意义 6 1.2 消失模铸造工艺的简介以及发展趋势 6 1.2.1 消失模铸造工艺的简介 6 1.2.2 消失模铸造工艺流程 7 1.2.3 消失模铸造工艺的特点与优势 10 1.2.4 国外消失模铸造工艺的发展历程 11 1.2.5 国内消失模铸造工艺的发展历程 12 1.2.6 消失模铸造行业的行业动态以及发展趋势 13 2. 本文论文来源及意义 15 2.1 课题来源与意义 15 2.2 消失模铸造工艺与模具制造的流程 15 3. 消失模铸造工艺与模具制造案例分析 17 3.1 重型发动机脉冲式排气管案例分析 17 3.2 拖拉机后桥壳案例分析 19 3.3 犁田机驱动轴壳体案例分析 23 毕业设计总结 25 致 谢 26 参考文献 27 消失模铸造工艺与模具制造的关系 摘 要 消失模铸造（又称实型铸造）是铸造工艺中兴起的一种铸造方式Lost Foam Casting（LFC）Full-Mould Casting is a kind of accurate shaping rising in casting technology ,and also a successful way of applied to casting field at present . After more than half a century of exploration and research, the technology has developed more mature, from the initial pure metal sculpture arts and crafts, such as, until now has been successfully applied to industrial production, it serves to show its applicability and suitability. At the same time, the Lost Foam Casting process is a very rigorous discipline, it involved in the scope of knowledge is very wide, such as: mechanical structure, heat transfer, fluid mechanics, etc., each link and the steps of process design have important impact on mould design and manufacture, is in Lost Foam Casting process design in mold manufacturing in the core position. In domestic epc industry, although the foundry enterprises pursue the goal and the partial focus is different, but with technology as the core idea, still is the soul of a business, it affects the mould manufacturing in the future . Lost foam casting process were introduced in this paper influence on mold design and manufacturing, and also analyzes the status quo of domestic epc mold manufacturing and industry blundering, through the analysis and interpretation of the following case, summed up in addition to the relationship between the process and casting moul