A0020_A0020M-06压力容器用钢板材通用要求.pdfVIP

Designation: A 20/A20M – 06 Standard Speci?cation for General Requirements for Steel Plates for Pressure Vessels1 This standard is issued under the ?xed designation A 20/A20M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense. 1. Scope* 1.1 This general requirements