ZG01CCO2Module.PDFVIP

ZG01C CO2 Module 1 Features of Design ZyAura, a world class leader and supplier of IR sensor technology and temperature measurement devices, is pleased to introduce a new CO2 monitor for use in scientific, commercial, and consumer applications. The ZG01C is a new and low-cost carbon dioxide monitor implementing IR-SoC technology; it can accurately detect carbon dioxide levels between 0 to 3000 ppm. This gas monitor is suitably fit for applications in Indoor Air Quality (IAQ), HVAC, safety, and other industries. 2 Specification Measurement Method: Dual Beam NDIR (Non-dispersive-Infrared) Sample Method: Diffusion or flow through (50~200ml/min) Performance - CO2 Measurement Range Display Resolution Accuracy Repeatability Temperature Dependence Pressure Dependence Response Time #R1 (63% Rise Time) Warm Up Time(CO2) Update Period Warm Up Time(Ambient Temp) Performance – Temperature Temperature Range Ambient Temperature Accuracy Temp Response Time Outputs Output Interface Digital Output Power Supply AC/DC Supply General Operating Conditions Operating TempRange Storage Range Dimension Weight Dimension Weight 0~3000ppm/0.3% (ZG01C) or 0~10,000ppm /1.0% (ZG01C-M) 1ppm ±50ppm or 5% of reading ±20ppm Typ.±0.2% of reading per °C or ±2 ppm per °C, whichever is greater, referenced to 25°C 0.13% of reading per mm Hg About 2min 60 sec 5 sec 20~30min 0-50°C (32 to 122°F) ±2°F (±1°C) When the fan blows to the device directly, the accuracy of temperature is ±1.5°C. 20-30 minutes (case must equilibrate with environment) 6pin Vertical Connector, Space=2.0mm) FFC (Flat Flexible Cable) connector UART(Baud Rate: 19200, Check Bit : None ,Data Bit: 8 bit, Stop Bit:1) 5VDC supply (±5%), Ripple and Noise (mVp-p) 200 0-50°C (32 to 122° F) 0-95% RH,non-condensing -20~60°C 100x21x15.5mm (3.94x0.83x0.61 inch) 36g (1.27 oz)without attachment 3 Communication Protocol The ZG01C has UART output , user can get the measurement data and do calibration . And there are 3 kinds of modes : EndUserMaster ,Com