欧洲水泥工业脱硝应用精选.ppt

* CEMENT DE-NOx APPLICATION IN EUROPE 欧洲水泥工业脱硝应用介绍 1) The European Cement Industry欧洲水泥工业现状 Manufacturing Technologies生产技术 Capacity from 1 000 to 5500 t/d 处理能力从1000到5500 t/d SNCR technology for NOx reduction is applicable on these technologies both dry and wet. SNCR脱硝技术同时适用于干法和湿法 Technology 技术类别 Pre Heater Towers 预热塔 Pre Calciner Towers 预分解窑 Lepol Gates 立波尔窑 Long kilns 长转窑 DENOX STATUS行业脱硝现状 283 Cement Manufacturing lines (2009) 283家水泥生产线 The majority of the plants in West Europe are equipped with SNCR technology 西欧大部分水泥厂都配备SNCR系统 First installations made 20 years ago. 20年前安装了第一套SNCR系统 One SCR installation 目前仅有一套水泥SCR系统 2) The European NOx Legislation欧盟关于Nox排放的相关规范 EU directive for Cement Plants not using waste as fuel以非废弃物作为燃料的水泥厂的欧盟指令 For plants using dry technology with heat recovery 工厂采用干法（带余热回收） 1 200 mg/Nm3 as 24 hours average For plants using half dry technology 工厂采用半干法 1 500 mg/Nm3 as 24 hours average For plants using wet or dry technology without heat recovery 工厂采用湿法和干法（不带废热回收） 1 800 mg/Nm3 as 24 hours average EU directive 2000/76/EU for Waste incineration in Cement Plants 2000/76/EU以废物焚烧水泥厂的欧盟指令 FOR PREHEATER PRE-CALCINER TECHNOLOGY For older plants using maximum 40% waste as fuel 使用40%以下废物作燃料的现有工厂 800 mg/Nm3 as 24 hours average Locally more strict rules 当地更严格的法规 For newer plants using maximum 40% waste as fuel 使用40%以下废物作燃料的新建工厂 500 mg/Nm3 as 24 hours average Locally more strict rules 当地更严格的法规 For all plants using more than 40% waste as fuel 使用超过40%以上废物作燃料的工厂 Local rules pointing at 200 mg/Nm3 as 24 hours average 局部地区更严格规定24小时的平均值是200 mg/Nm3 Typical Type of Waste used使用废物的典型类型 1. Tires 轮胎 2. Plastic fluff 塑料绒毛 3. Waste oils 废油 4. Animal fat 动物脂肪 5. House hold waste 生活垃圾 6. Wood 木材 Future Trend未来的趋势 Long kilns shall apply 800 mg/Nm3 长转窑应采用800 mg/Nm3 Pre heater and Pre calciner Towers shall apply 500 mg/Nm3 预热器和预分解窑应采用500 mg/Nm3 Locally more strict rules pointing at 200 mg/Nm3 局部更严格的法规是200