原创力文档- 1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
- 2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
- 4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
- 5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
- 6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 7、VIP文档为合作方或网友上传，每下载1次， 网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
DIN51562-2-1988粘度测量用余白罗德(Ubberlohde)粘度计测量动力粘度
UDC 532.13.08 :620.1.05
DEUTSCHE NORM
Viscometry
Determination of kinematic viscosity using the Ubbelohde microviscometer
December 1988
DIN
51562
Part 2
Viskosimetrie; Messung der kinematischen Viskosit?t mit dem Ubbelohde-Viskosimeter;Mikro-Ubbelohde-Viskosimeter
Inkeepingwith currentpractice in standardspublished by the InternationalOrganizationfor Standardization(/SO),a comma has been used throughout as the decimal marker.
1 Scope
The method specified in this standard serves to measurethe viscosity of small samples under conditions similar to those described in DIN 51562 Part 1. The Ubbelohde microviscometer specified here permits short flow times to be measured, and small Hagenbachcorrections to be used (cf. Explanatory notes).
12 2
2 Measurement range
The Ubbelohde viscometer is designed for a kinematic viscosity range of 0,35 to about 800 mm2/s,at flow times over 100s for manual measurement and, generally, over 30 s for automatic measurement;subject to calibration (cf. clause 6),
the viscometer may be used for flow times down to 23 to 25 s
(depending on the stability of the suspended level). The viscometer may generally be employed for fluid temperatures from +10 to +lOO°C. It should be noted that the temperature may range from -40 to +15OoC,but that, in this case,the precision given in clause 8 is not attainable.
3 Sampling and sample size
Sampling shall be carried out in accordance with the specifications or standards applicable to the test liquid, about 2 ml of which will be sufficient for a single charge.
4 Test apparatus
See DIN 51 562 Part 1.
4.1 Ubbelohdesuspended-levelmicroviscometer
(cf. figure 1)
Since asingle capillary only permits a smallviscosity rangeto be covered,a number of capillaries of the same length but of different diameters should be used (cf. table 1). The viscometer shall be so designedthat the viscometer constant, K, does not differ by more than 20% from the guide value givenintable 1.Theconstant shall be durableapplied on the viscome
文档评论（0）