iDen_ALTK_PQE_Rev_.docVIP

Signatures on File Gregory Brookes Quality Assurance Manager Date German Malaret ALT Supervisor Date Stuart Warszycki Document Control Date Revision History Issue Date Revised By Description of Revision O 11/5/04 Stuart Warszycki Changed Specification number from 0009188T25 to PQE-110 to incorporate major changes to test flow. Modified Drop sections to reflect change to 4 foot drop height at room temperature. Removed Mechanical Leg of testing. Created new numbering scheme for environmental testing leg. Updated document sections to tailor to iDEN requirements. A 11/11/2005 Stuart Warszycki Created drop schedule table in Appendix F. Added information for Blue Tooth and EMI testing in sections 10.3, 10.6, and 13.4. Modified ESD section 12.3.1 for 12M09158A58 compliance. Added radio orientation information for first and second shaker table vibration in 12.3.2 and 12.8.2. Added ESD replacement radios in 12.3.1 and 12.8.1. Several syntax errors corrected. B 4/28/2006 Stuart Warszycki Changed ESD Section 12.3.1, as per Mobile Devices CR 2006-3. 2 of 4 ESD units tested in standby, while other 2 are tested in a call while connected to a power source. Updated Section 12.8.1 with similar criterion for ESD#2. CONTENTS Scope Product Submission Responsibility ALT Reliability Manager ALT Engineer/Technician Design Engineer Reference Documents Definitions and Acronyms Marking the Product Initial Inspection Charging the Units Programming the Units Testing 10.1 Functional Test 10.2 Signaling Test 10.3 Parametric and Blue Tooth Test Specifications 10.4 SQE Testing 10.5 Camera Testing 10.6 GPS 11. Tests Between Stresses to Capture Failures 12 Environmental Sequence 12.1 Thermal Shock 12.2 First Drop Sequence 12.3 First Parallel Shaker Ta