地基处理之沉降控制复合桩基.docVIP

地基处理之沉降控制复合桩基： 一、桩采用200×200，250×250，长细比80左右预制桩，桩长一般为16～20m； 二、桩距不宜小于5～6倍桩身断面边长； 三、桩端应穿过高压缩性淤质土层，且进入压缩性相对较低，但不十分坚硬的土层作为持力层； 四、复合桩基单桩极限承载力标准值应通过单桩静荷载试验确定，试验时沉桩后间隙时间不宜小于30天，当没有进行桩的静载试验时，可据下式确定：RK=UPsum;fsili+fPAP，同时满足Rkle;（0.6～0.75）fcAc； 五、复合桩基整体承载力应满足：Fd+Gdle;zeta;kRk+ACfsd.当上式不能满足时，宜调整承台面积； 六、复合桩基主要应用于八层以下的多层建筑； 七、复合桩基的承台面积所承受的竖向总荷载不超过1.5～1.7倍地基承载力； 八、杂填土、暗浜土和液化土不可作为复合桩基，遇以上土层时应作处理。 以上内容均根据学员实际工作中遇到的问题整理而成，供参考，如有问题请及时沟通、指正。             广州陶粒厂 广东陶粒厂 编辑:ejdnchh 1.6 high vocational designed manufacturing class national career qualification education training programme--car detection and maintenance technology professional teaching plans a, and training target and training specifications car detection and maintenance technology professional training oriented car Hou market of car maintenance, and car sales and after-sales service integration enterprise, and and and car using and maintenance about of career field of production, and service, and management line post, training support party of line, adapted car maintenance, and car using front line need, de, and wisdom, and body, and beauty full development, Has good all-around professional ability, knowledge of professional theoretical knowledge and good practice, can successfully enter car market employment, through vocational training, continuing education, self-taught, to continue learning channels to achieve all-round development in all aspects of vehicle inspection and maintenance technology of high quality workers. Through the system of training, so that students have a scientific world Outlook, Outlook on life and the spirit of patriotism, collectivism 1.6 high vocational designed manufacturing class national career qualification education training programme--car detect