复式传热回转圆筒干燥器设计 毕业论文 .docVIP

辽宁石油化工大学毕业设计（论文） Graduation?Project (Thesis) for Undergraduate of LSHU 题 目 复式传热回转圆筒干燥器设计 TITLE Design of double heat transfer rotary drum dryer 学 院 School 专业班级 MajorClass 姓 名 Name 指导教师 Supervisor 20 年 月 日 论文独创性声明 本人所呈交的论文，是在指导教师指导下，独立进行研究和开发工作所取得的成果。除文中已特别加以注明引用的内容外，论文中不包含任何其他个人或集体已经发表或撰写过的研究成果。对本文的工作做出重要贡献的个人和集体，均已在文中以明确方式标明并致谢。本声明的法律结果由本人承担。 　　特此声明。 　　　　　　　　　　　　　　　　论文作者（签名）：　 　 　　　　 　　 年 月 日 摘 要 关键词：干燥，煤，回转圆筒，复式传热。 Abstract Development changes with each new day which along with the chemical industry, the dry technology also will draw close the mechanization,the automation. But the rotary cylindrical dryer because its productivity adaption scope big, the power consumption are few, widely applies to the dry each kind of granulated solid. This article has made a detailed analysis and computation on the coal to the rotary cylindrical dryer. In heats up in the way, has chosen the duplicate heat transfer, greatly enhanced the heat transfer efficiency, thus reduced the water extractor huge this weakness, moreover, this article has compared each quantity of heat transfer mode, has chosen the most superior heat transfer; Makes music the detailed computation to the mechanism, and choice necessary supplementary installation, more perfect design integrity. Only change the amount of hot wind, and the hot-blast temperature, this article also may use in like the chemical fertilizer and so on solid class dryness. When design, also may the sacrificial vessel have the similar heat transfer or the similar installment computation makes the reference. Key words:dry, coal, rotary cylindry, duplicate heat transfer. 目录 1 绪论 1 2 设计方案的论证 2 3 主要参数的确定 5 4 干燥器结构设计 7 4.1 内筒体的结构设计 7 4.1.1 结构创新 7 4.1.2 内筒厚度的选取 8 4.1.3 内筒重量的计算 9 4.1.4 弯矩与应力计算 10 4.1.5 筒体变形计算 12 4.1.6 内筒支撑件的设计 13 4.2 外筒体的结构设计 15 4.2.1 外筒体的厚度确定 15 4.2.2 保温层的确定 15 4.2.3 外筒体的载荷计算 17 4.2.4 外筒体弯矩与应力计算 19 4.2.5 弯曲应力计算 21 4.2.6 筒体变形计算 21 4.2.7 筒体安装尺寸计算 2