等离子基础知识例析.pptVIP

Sustain Cycle Repeat Step 1 to Step 5 Will tell you meaning of Plasma and common usage of plasma technology for our life. So that you can understand what is plasma. CLICK Initialize, Write and sustain function’s cycle is called Sub-Field. Initialize and Write period are specially called Address period. Sub-Field cycle is Key of PDP picture reproduction operation. CLICK Approximately 1.2 millions pixels (852 x 3{3 colours} x 480) are formed between rear and front glasses plate. 2 glass plate have 3mm depth. CLICK 3 electrodes is located on glass plates, Data electrode is on rear glass and scan and sustain electrodes are on front glass. Scan and Sustain electrodes are made by transparent material. CLICK Each colour`s area are divided by the Ribs. CLICK Dielectrics are painted on rear and front glasses.(Overcoat (MgO) is also applied on the front glass) CLICK Colour phosphor is applied . CLICK Low pressure(Approx.. 0.6 Torr) of Xenon and Neon gas is applied into the pixels and sealed. CLICK IR(Infrared Lay) / EMI(Electro-Magnetic interference) filter glass is applied in front of front glass. Pixel can not be controlled if the electric charge is remained. Therefore at first all remained charges are cleared by Initialization. CLICK To remove(Initialize) Electric charge(wall voltage), sharp edge pulse is applied to sustain electrode and make discharge short period. Then any electric charge(wall voltage) is initialized. CLICK From 2nd sub field this function initialize remaining wall Voltage. 2nd function is Write(address) which select the emission required pixel. CLICK CLICK Data Pulse which is positive polarity is input to data electrode and Scan pulse which is negative polarity is input to scan electrode simultaneously. That means sum of data and scan pulses voltage is applied between two electrodes as discharge start voltage. Discharge is started into the pixel and gas is ionized. CLICK After input pulses gone, Ions and Electrons which is genera