毕业设计-霍尔传感器应用设计.docVIP

传感器综合设计实训 (论文)说明书 题 目： 霍尔传感器应用设计 院 （系）： 信息与通信学院 专 业： 电子信息工程 学生姓名： 学 号： 指导教师： 摘 要 电动机作为机械化、电气化和自动化的原动机，广泛应用于国民经济建设、国防建设、科学技术研究和人民物质文明生活的各个领域电机生产过程中应用十分广泛对其转速进行测量本文介绍了单片机的直流电机转速测量系统测量转速的霍尔传感器和机轴同轴连接，机轴每转一周，产生一定量的脉冲个数，由霍尔器件电路部分输出幅度为12V的脉冲。经光电器后成为输出幅度为V转数计数器的计数脉冲。控制计数时间，即可实现对。通过1602实现在LCD上直观地显示电机的转速值。硬件。关键词霍尔传感器单片机 Abstract  Motors, as the original machine of mechanization, electrification and automation are widely and common used in the various areas of construction of national economy, national defense, science and technology research and materiality civilization. And it is very important in manufacturing, measuring its rotational speed becomes very essential and necessary. The principles of motor speed measurements with hall sensor was described in this article and DC motor speed measurement system which is based on AT89C51 was designed, and the corresponding hardware circuit designs was also completed accordingly. The hall sensor is connected with crankshaft by coaxial junction. Every revolution of the crankshaft will generate a certain amount of pulses whose amplitude is 12v. The opto-coupler turns these certain amount of pulses into 5-amplitude count impulse. The motor speed can be measured by controlling the time. In the design of display circuit, the number of motor speed is displayed in LCD directly through 1602. The motor speed measurement system and the hardware circuits, display circuit function are debugged to cooperate with the software to display and alarm users. The simulation results have proved that the hardware circuits design and software program is correct, and the system can meet the designing requirement completely. Key Words: Motor Speed Measurement; Hall Sensor; Microcomputer; 89C51；LCD 目 录 引言 1 1 课题设计目的和要求 1 2.1 霍尔测速模块论证与选择 2 2.2 系统的组成框图 2 3 硬件设计 2 3.1 霍尔传感器硬件设计 2 3.1.1 A3144霍尔开关的工作原理及应用说明 3 3.1.2 霍尔