On the yield functionals in Lagrangian stress space of elastic-plastic materials with inter.pdfVIP
- 2
- 0
- 约3万字
- 约 11页
- 2017-04-06 发布于江苏
- 举报
On the yield functionals in Lagrangian stress space of elastic-plastic materials with inter
-1-
On the yield functionals in Lagrangian stress space of
elastic-plastic materials with internal constraints
Fu Mingfu,Chen Liangsen
Center for Engineering Mechanics, Nanchang University, Jiangxi Province, China (330031)
E-mail:fmfu@,
Abstract
In the present paper it is shown that the elastic range in the second Piola-Kirchhoff stress space can be
chosen in a hyperplane perpendicular to the direction
p
γ
=
?
? C CC
if the determinate stress response of
the elastic-plastic material with simple internal constraints with the condition (2.30) is correctly chosen,
otherwise, it is in general in a hypersurface and the normal flow rule by Il’yushin’s postulate will have
an indeterminate part( [8]). The choice of determinate stress response is probable because of its
indeterminacy ([1]). Therefore the yield functional should be a function of the second Piola-Kirchhoff
stress lying in the hyperplane so that it is more simple and the back stress as the geometric center of the
elastic range in general is inside the elastic range. Finally some examples are concerned.
Keywords:Elastic-plastic materials Constitutive relations Internal constraints
1.Introduction
Truesdell and Noll [10] assumed that for simple materials with simple constraints their stress
responses can be divided into two part, i.e, the stress is the sum of determinate stress and reaction
stress, the determinate stress is determined by the admissible deformation process and the reaction
stress is work-powerless. For simple internal constraints, Carlson and Tortorelli[3] has proved that
the reaction stress is work-powerless for hyperelasticity, Casey[2] for elasticity and Baesu and
Casey [1] for Lagrangian elastic-plastic materials. Truesdell and Noll [10] also pointed out that the
stress response functional for determinate stress has some indeterminacy. The normalization
condition can remove this indeterminacy, as proved by Cohen and Wang [5] and Vianello [11] for
elastic material
您可能关注的文档
- MS6060单双行计步表IC-Ver1.1.pdf
- MSc in Interactive Media.pdf
- MSDS of SDIC.pdf
- MSDS VAM_en v5.0.0.pdf
- MQ_Cup_brochure.pdf
- MSDS-Versamid 125.pdf
- MSDS-Ferric Sulphate.pdf
- MT3329_datasheet.pdf
- Mstar 6m48规格书.pdf
- MTK程序编译 百度空间应用平台.pdf
- 2026《面向多样性的隐私保护推荐方法概述》7800字.docx
- 2026《基于PLC的智能立体停车场的控制系统设计》7200字.docx
- 2026《太赫兹技术概述》4200字.docx
- 2026《分布式电力系统经济调度研究现状国内外文献综述》2800字.docx
- 2026《曲美家具集团股份有限公司成本管理存在的问题及对策》5600字.docx
- 2026《基于肌肉信号的人体运动研究国内外文献综述》3400字.doc
- 2026《基于城市林学植物配置问题研究》7200字.docx
- 2026《社区重点人群管理平台设计与实现》7900字.docx
- 2026《区县医院内网的设计与实施研究》6900字.doc
- 2026《静电除尘的原理及高频电源的优势综述》3100字.doc
原创力文档

文档评论(0)