计算机网络技术基础教学课件作者徐红教学资源安普线缆制作标准10课件.pdfVIP

MT-RJ OPTICAL FIBER SYSTEMS FIELD TESTING MT-RJ System Field Testing Made Easy 2 TABLE of CONTENTS INTRODUCTION......................................................................................................................................... 3 TESTING WITH A ONE-PORT TEST SET.................................................................................................. 8 CONCLUSION .......................................................................................................................................... 10 Appendix A: Test Configuration Examples........................................................................................... 11 Reference Set-up ..................................................................................................................................... 12 Test Set-up............................................................................................................................................... 12 MT-RJ Dual Fiber Tester, e.g. GN Nettest .............................................................................................. 13 Reference Set-Up..................................................................................................................................... 13 3 INTRODUCTION This paper describes field test procedures for MT-RJ optical fiber systems. TIA/EIA 568, Commercial Building Telecommunications Cabling Standard, currently recommends the one jumper reference method. This procedure is described in TIA/EIA-526-14A, Optical Power Loss Measurements of Installed Multimode Fiber Cable Plant, and TIA/EIA-526-7, Measurement of Optical Power Loss of Installed Singlemode Fiber Cable Plant. Recently, TIA published a Telecommunications Services Bulletin TSB-140, Additional Guidelines for Field-Testing Length, Loss and Polarity of Optical Fiber Cabling Systems. This TSB supplements the two OFSTP documents. All of these docum